rc sailboat stl

•  Free 3d models
•  For Sale

3D Printed RC Sailboat

Introduction: 3D Printed RC Sailboat

I am a grade 8 student in Corpus Christi school. I have been recently mastering the form tool in Fusion 360. I have always had a passion for sailboats, so I decided to make a small RC sailboat with this tool. Using some servos I had lying around as well as and receiver and small battery. This boat is relatively small but I printed the parts on my Ender 3 but the hull I had to have it printed by another a 3D printing company. Using the stuff I learned from this smaller project I want to integrate in to a much bigger craft.

• 3D printer (I used an Ender 3)
• Liquid electrical tape (Can use electrical tape as alternative)
• Wooden dowel (.2in) (One section 5.5 in long (Boom) and the second (Mast)
• Thin Gauge Wire
• 1 9g servo (Modified)
• 1 4g servo (Unmodified)
• RC receiver (I used a Flysky FS-i6)
• 2s micro battery, JST connector

Step 1: Designing and Printing the Hull

• Print the Hull, Mast, boom, Boom to mast Connector, rudder.
• Print the cabin and coat the sides with the liquid electrical tape, depending on how big the cockpit is for your boat, for me I used about 4 coats (Note: Would recommend test floating and if water gets in either add more tape or liquid electrical tape coats)
• Using the boom and mast link them using the Boom to Mast connector. If the Boom is too loose you can either rap the end in electrical tape or glue it in place

Attachments

Step 2: Making the Sail and Attaching the Rudder

Making the sail is probably the hardest part of building this boat

• Using the boom and mast linked together draw a triangle inside the two pieces.
• Using the thin gauge wire poke a hole in the sailcloth and wrap it around the mast, repeat this process on themes about 5-7 times and then after this repeat the process along the boom about 4-5 times
• Print the file attached below
• After the rudder has been printed make sure that it fits in the rudder slot on the stern of the boat.
• using a soldering iron on the small portion of material behind the rudder slot melt a small hole maybe 2mm deep.
• After this is completed insert a piece of thin gauge wire into this hole and glue it down. Insert the other end into the hole in the rudder. After this is completed just attach a separate section of wire to the top hole in the thin section of the rudder up top and attach that end to the rudder servo

Step 3: Attaching the Electronics to the Cockpit

• Attaching the electronics should fairly simple. use the picture above for reference. I have marked all the places were the electronics should be placed in order for proper alignment and so everything should fit. I would recommend water proofing your electronics as the seal created by the cover is not perfect and the slot cut for the main sheet will let water in when keeling.
• In order to get your main sheet servo to work it must be a 360 degree servo. you can either buy one or modify a regular 9g servo. I have attached a video below on how to do so

Step 4: Test Run/Float

Now you have completed the project! I would recommend test floating it in a bath tub to make sure everything balances right then you can take it out too your local pond or lake and sail away.

Sign In or Create Account

Forgot password.

If you don't receive the email within an hour (and you've checked your Spam folder), email us as [email protected].

• Hobby & Makers
• RC & Robotics

3D printed RC Jet boat OLD DESIGN

• Makes & Comments 72

Related models

• Collections 376
• User print files 0

Description

NEW DESIGN: https://www.printables.com/model/496157-jetboat-hull-new-design  

Boat for wild river runs.

There is a hull extension available to extend the boat length.

THERE is a new hull design:

https://www.printables.com/model/496157-jetboat-hull-new-design

If you want to support further development - support my work with a donation of your choice: https://paypal.me/Alexander2901?locale.x=de_DE 

https://youtu.be/LK_amZywxLA https://youtu.be/lupZR7mE_n8

instructions

https://www.instructables.com/3D-Printed-RC-Water-Jet-Boat-Customizable-UNDER-CO/

after many requests now the screw list:

to assemble the hull

  8- M3x20mm

  4- M3x15mm

  12- M3 treaded inserts - melt in

for motor plate:

  6- M4x20mm

  6- M4 treaded inserts - melt in

  6- M3x8mm

  6- M3 washers

Jethousing to hull:

  11- M3x6mm

  9- M3 nuts

  2- M3 treaded inserts - melt in

static blade to jet housing

  6- M3x30mm

  6- M3 washer

  6- M3 treaded inserts - melt in

steering nozzle

  2- M3x6mm or self threading wood screw cut to 6mm

  1- M3x12mm

  1- M3 washer

  1- M3 nut (self locking)

Model origin

The author marked this model as their own original creation.

Attribution-NonCommercial

Highlighted models from creator.

Spooly cable safe - no bending cables

cable spool ethernet cable

Intex Bestway nozzle angled design for a clean pool

Blank Business card case

RC Jet Boat

3D Printed RC Boat Project

RC BOAT - LEGO 3D PRINTED

3D Printed RC Utility Boat

This site requires javascript enabled.

Discover in this new collection of 3D models all the 3D printer files related to boats and sailing

⛵ best boat 3d models.

3D printed boats

On this page you will find a large number of free or paid 3D files for boat enthusiasts. Some boats are only decorative, but others can easily sail on water. There are sailboats, catamarans, fishing boats and even huge cargo ships.

Popularity Ranking

Benchy - The jolly 3D printing torture-test

BEN the floating BENCHMARK (Benchy)

RMS TITANIC - scale 1/1000

Columbus caravel Nina (1492)

LEO the little fishing boat (visual benchy)

bathtub boat

JUN - the Jungle Queen

Smoke for #3DBenchy boat

Little bathtub tug boat (visual benchy)

Turbo-boat --> print in place / no supports / no assemble.

Small compressed Titanic and scale example of the iceberg

Small fishing boat - floating toy for kids

COS - the Container Ship

CAS - the modular xyz-cube cargo ship

Container Ship

Paddle Boat

FIN the little Trawler (visual benchy)

EMMA - a Maersk Ship

The Endeavor

Mini RC Jet Boat 200 Mono

Battleship - Recreated

Motor Boat RC small (experimental)

The Trinidad

Sailboat Scale Model Esc: 1:43, based on Westerly Tiger 25

The Bao Chuan

RC Cruise Ship / Ferry Viking Grace (toy)

ship (battle)

The Sao Cristovao

FERRY - the little transport miracle

ICE - the icebreaker

Research Vessel

RS1: Cargo ship

VOS - the Supply Ship

Cruise Ship

Impeller Boat RC - spiral vase printable

OLI - the little Ocean Liner

Speed Boat 2 RC

SAR - Search & Rescue boat

B - a hommage of brigitte bardot

Two Hulled Impeller Boat RC (experimental)

Speed Boat RC (experimental)

Latest 3d models of the collection, printed by the makers.

Fehmarn - a north german island ferry

Here is our selection of the best STL boat files , all these beautiful boats are from the 3D file library Cults and are perfectly printable in 3D .

This collection includes many free and paid 3D files that will allow you to 3D print at home many variations of boats. Each Cults 3D designer has his own vision of the boat, so you will find incredibly realistic boats designed like models, but also more childish boats to play in the bath. Obviously impossible to talk about 3D printing and boat without mentioning the famous Benchy , this boat that floats and is an excellent calibration test for your 3D printer .

Then of course, there are the purely decorative boats to carefully place on your shelf, then there are the 3D printed boats that float and can therefore go on an adventure, and finally there are the remoted RC 3D printed boats . Some 3D designers have even created boats with a 3D printed engine that is perfectly functional ! In terms of format there is everything you can imagine: large cargo ships, catamarans, sailboats, fishing boats...

• Become a partner
• Merchandising
• Terms & conditions
• upload tips
• Maker Toolbox
• Design on Demand
• Coupon codes
• Best STL files
• Best sellers
• Best CNC Laser Cutting Designs
• Trending searches
• Best 3D designers