yacht keel manufacturers

Pendas CS Ltd 2015

World Class

Yacht keels, castings and steel fabrications

Motor solutions and supply                                   Irons Brothers Limited

The Foundry

United Kingdom

Tel: +44 (0) 1208 812635

Fax: +44 (0) 1208 814884

Email:   [email protected]

Yacht keel specialists with over 40 years experience

Irons Brothers Ltd have been in operation based in Cornwall for over 75 years producing high quality iron and non-ferrous castings.

Over the past 40 years, they have specialised in the manufacture of yacht keels and are one of Europe's largest independent suppliers to the yacht building industry, supplying keels for both production boats and custom builds.

Today the company has diversified to produce a range of cast products including highly detained and accurate, replica cast cannon along with street bollards and man hole covers, to name but a few.  The company has recently started an electric motor solutions department - details  here .

Keel options

All our yachts offer a choice of six different keel configurations. Take the opportunity to equip your boat with the sailing characteristics of your choice and match it your preferred sailing area.

There are up to four different fixed keel variants available. We offer the performance-orientated deep keel with lead bulb, the low-cost standard solution made out of cast steel or you can choose one of our shallow keel options.

Our twin-keel design has been optimised according to the latest hydrodynamic research, and comparison tests have shown that there is little or no loss in performance compared to the standard fin keel. The twin-keels are ideal if you wish to dry out between tides.

Alternatively, our unique swing-keel provided considerable flexibility. Instead of a half skeg and centre-line rudder, this version has double rudders. The lift-keel design does restrict you to certain interior options, but it offers high security and excellent performance, it’s controlled by electro-hydraulic mechanism that moves the full-ballast keel.

Even our fin keels give you the possibility to choose between 4 different designs. Choose between the performance-oriented deep keel with lead bulb, the cost-effective cast iron keel or the shallow keels with minimum drafts of 1.15 m, for example, on the Sirius 310 DS.

Our twin-keel design has been optimized according to the latest hydrodynamic research, and comparison tests have shown that there is little or no loss in performance compared to the standard fin keel. The twin-keels are ideal if you wish to dry out.

In November 2015 “Sailing” magazine tested the Sirius 40 DS in the fixed keel version (1.75m) and the twin keel version (1.45m). The verdict? “Despite the extra weight and only 1.45m draft, we could not find any difference in the sailing performance and the height in the wind compared to the well-sailing fixed keel version”.

Swing keels

We developed a very interesting solution to the design of a swing keel. We have worked closely with manufacturers who have more than 20 years experience with swing keels in one-off boats of up to 80 feet. More than 40 of these one-offs are sailing in the North Sea and to distant shores, they have proven to be very successful as racing boats too. We have distilled all the experience of these customers and constructors and have developed our clever design.

Our system operates with an electro-hydraulic powered swing keel that carries the whole weight of the ballast in the swinging part. When raised, it protrudes about 15cm out of the hull and distributes the weight of the boat along its length together with a small grounding plate around the lifting keel box. We use a double rudder system. On grounding, the depth of the rudders is only 5 cm less than the hull, they are very strongly built so that the boat is supported not only by the flat hull and keel but also by the double rudders.

When sailing, our system ensures the best performance with a very deep centre of gravity, especially when compared to many other systems which carry most of the weight in the grounding plate and therefore need nearly double the weight of ballast without ever reaching the same stability.

General Manager – Torsten Schmidt SIRIUS-WERFT GmbH Ascheberger Straße 68 24306 Plön/Holstein

Fax: 0049 – 4522 – 744 61-29

Receive regular updates from Sirius Yachts

Subscribe to our email newsletter

Privacy Overview

• AMERICA'S CUP
• CLASSIFIEDS
• NEWSLETTERS
• SUBMIT NEWS

New Case Study: Custom Keel Solution for Leading Yacht Manufacturer

Related Articles

• Custom Metal Casting

Custom Lead Sailboat Keels

Rotometals.com

Write a Review

• Create New Wish List

Description

The above is an example of one of the custom sailboat keels that we have poured.

We specialize in custom keel pours of up to 5000 pounds and can handle many shapes and sizes of keels. Typically, the customer will supply us with a mold made from steel or Plaster of Paris and we can fill the mold full of lead. Once cooled, the keel will be prepared for pick up or for shipping.

Please call or email us with your details for a quote today.

Related Products

Lead Sailboat Keel 6"x7"x96" ~1600 lbs

Sailboat Keel Plug Counterweight 6.5"x7"x35"

Lead Bullet Casting Thermometer 6"

Duck Canvas 10 oz Bag about 6" x 14" great for up to 25 pounds

Cut in Half LEAD Pig Ingot 42-47 Pounds-99.9% with Freight Included

RM Yachts: French plywood sailboat manufacturer

Over 30 years of plywood yacht building expertise.

Welcome to RM Yachts!

French sailboat manufacturer since 1989, our shipyard based in La Rochelle is specialised in the construction of fast cruising yachts of 30ft to 45ft in plywood and epoxy – approximately 9 to 14 meters.

Whether you are looking for a coastal cruising sailboat, or planning longer open sea trips, such as Atlantic, Pacific crossing, or round-the-world sailing, there will always be an RM yacht fitting your project.

We are actually the sole shipyard and manufacturer having built over 500 monohull sailboats using this material and this sailing yacht building technique. Needless to say, we know plywood-epoxy in-and-out.

This material’s benefits are numerous: lightness and stiffness, for increased performance under sail, and a dry and sane interior atmosphere, thanks to its thermal and phonic specifications.

Not to mention its reduced impact on the environment, compared to other materials usually found in naval construction (GRP, polyester, etc.).

Designed by award-winning architect Marc Lombard, RM yachts are 100% made in France, and then sail around the world. Our clients frequently share their anecdotes and logbooks from their solo or family adventures on our modern sailing boats.

Available in different appendage versions (single-keel, twin-keel, lifting-keel, single or twin rudder), RM Yachts are customisable, starting with their hull colour and interior design.

Advising you to choose the best cruising sailboat

Thanks to our many years of experience as a sailing yacht manufacturer, we have designed our website to provide you with all the information you need to select your next cruising yacht :

• What is important when choosing a cruising sailboat?
• What is the best size for a coastal or bluewater cruising yacht?
• How to choose the best sailboat to live on?
• What options are to be considered when preparing an ocean crossing or a circumnavigation?

Our F.A.Q. section is also a great source of information to help you find the ideal sailing boat according to your needs and sailing plans.

You are more than welcome to visit our premises, and we can also set up a sea trial! Our team will be more than happy to help you configure your brand-new sailing yacht

Alternatively, you can also have a look at our previous models and see how high our used monohull sailboats are on the market. Our expert brokers remain available for additional information.

Finally, acquiring an RM also means you have access to a panel of services, provided by Grand Large Yachting group’s dedicated subsidiary: Grand Large Services. Whether it’s about training lessons, spare parts, maintenance, or refit before slipping lines, our specialists are here to help!

Bring your own dreams, we’ll take care of everything else.

Looking forward to meeting you soon,

The RM Yachts team.

Keep in Touch' Restons en contact

We will send you RM Yachts News (Only) to make sure you are up to date. Recevez (seulement) nos infos, pour être sûrs de ne rien rater !

• FR - Français
• EN - English

Yachting Monthly

• Digital edition

Why twin keels are making a comeback

• Theo Stocker
• March 20, 2019

French boat builders are leading the way with versatile new twin keel boats. Theo Stocker went to discover the appeal and how to dry out in style

There are a significant number of sailors who prefer boats that can take the ground

Bilge keels can be a divisive topic. While it might seem like the majority of new boat buyers are in favour of fin keels, there is a significant undercurrent of sailors who prefer boats that can take the ground.

While fin keels offer a deeper centre of gravity, marginally less drag and more lateral resistance, making them theoretically better at sailing to windward, they are a relatively recent development and it’s not long since all yachts were long-keeled and could comfortably dry out on legs or alongside a harbour wall.

In the tidal waters of the UK, where drying harbours and half-tide creeks abound, the ability to dry out can vastly increase both your potential cruising grounds, and the cost and location of your home berth.

There are a wealth of shallow draft cruisers available on the second-hand market today.

Moody, Westerly and Hunter all produced enormously popular bilge keel models, while Southerly, Parker, Feeling, Ovni and Allures have been making lift keel and swing keel yachts for years.

Drying out opens up new cruising grounds

Latterly, it is the French centre-board yachts that have proved most popular for the adventurous sailor keen to get off the beaten track. That may explain why bilge keels have rather waned.

There are some new kids on the block, however, that are reinvigorating the concept.

Most notably, La Rochelle-based RM yachts offer a range of epoxy-infused plywood boats that can take the ground between their two keels and a weight-bearing rudder.

Hot on the heels of these French class leaders are Brittany yard Marée Haute and their Django brand, which produces lightweight GRP pocket cruisers from six metres up to 12 metres.

While they offer deep fin and lift keel options, it is their twin keeled versions that are currently proving most popular. So where better than Brittany to go for a test sail?

We went along to try drying out in the latest incarnation of these new and interesting twin keel cruisers.

BILGE KEEL OR TWIN KEELS?

There have been many design variations that come broadly under the term bilge keels. Strictly speaking, bilge keels are in addition to a long central keel, fitted near the bilge, where the hull turns from the bottom to the side of the boat.

Traditionally, these were non-structural, shallow and long, largely intended to reduce rolling. Twin keels, in contrast, replace the central keel entirely and the boat is structurally adapted to make these the main ballast-bearing hull appendages.

Some early twin keel moldings simply added two shallow-draught keels either side of the centreline, at right angles to the waterline and parallel to the centreline, but these boats often tended to sag to leeward when sailing upwind, and sometimes lacked the proper hull reinforcement at the attachment points.

More modern twin keels tend to be much better hydrodynamically aligned and, some argue, provide at least as much lateral resistance as a single keel, though in theory, more drag.

A boat with two keels will tend to be heavier because of the additional reinforcement needed to bear the loads of the ballast and of drying out, and will usually have a higher centre of gravity because of their reduced draught. Again, modern construction, narrow-chord keels and ballast bulbs all help to reduce these effects.

1 FINDING A SPOT

The art of drying out is all about finding the right spot to take the bottom. In an ideal world, you would find somewhere that is totally sheltered.

Luckily, when drying out you can tuck in much further than you normally would, but you don’t want any swell coming through that will lift the boat and drop her on her keels in the crucial moments that she is settling down, or refloating as the tide returns.

Most twin keelers will be designed to withstand some wave action on the keels, but you don’t want to push it. You then need to find an area of seabed that’s as level as possible. Despite the fact that you are suspending the boat’s weight at over a metre’s height, the wide set keels ensure she is very stable, so unless you are on rocks, you should be fine.

Finding a sheltered anchorage without too much swell is vital when drying out. Credit: Alamy

The type of bottom makes a difference too. Rocks will tend to be uneven and could damage the keels, although smaller stones won’t be a problem.

Gravel, sand or mud are ideal and will normally be pretty level. Hard sand is the ideal as you will then be able to walk to and from your boat with ease at low tide, but it’s worth having a pair of wellies on board for the inevitable muddy puddles that will be left as the water recedes.

Before you decide to dry out, it’s crucial to plan ahead. You might have enough water to get in on this tide, but you don’t want to get neaped if the tides are dropping off.

Similarly, have a look at the forecast. If the wind is forecast to change while you are dried out, check that the anchorage will remain protected.

Don’t forget to note the barometric pressure and general wind direction, which can have a significant impact on the predicted tidal heights.

While charts will help, local knowledge is king. Almanacs and pilot books will give useful advice for where to go, but ask other sailors too.

Locals may well know little spots that are well and truly off the beaten track.

2 ANCHORING

Once you have chosen where to dry out, you will need to anchor. If you are in an open bay with plenty of space, a single bow anchor will be fine.

It’s an odd feeling waiting for your yacht to go aground

If it is important which way you are facing when you dry out, however, such as on a sloping beach, in a narrow river, or if there are other boats around, you will need to lay both a bow and a stern anchor to control your position.

In drying harbours, there may already be moorings, often fore-and-aft, to stop the boat from swinging.

3 PREPARING THE BOAT

Fit any legs or transom support

You may need to rig extra gear to keep the boat upright. Some fin keel and lift keel boats will have drying-out legs.

Bilge keelers with reasonably long keels fore and aft will be stable enough fore and aft with no additional gear, but more modern twin-keelers often aim to create a tripod, between keels and a weight-bearing rudder or an additional leg.

The Django 770 has an adjustable transom leg. While this is weight-bearing it’s more of a stabiliser and should be set slightly short in a swell.

4 DRYING OUT

If you are in a place you are familiar with and have dried out in before, you should be safe to anchor or moor the boat securely and head ashore while the tide goes out.

If you are somewhere new, however, it is worth staying with the boat for the critical period that the keels are taking the bottom until the boat is securely aground.

It is worth staying on your yacht while it is drying out if you are stopping somewhere unfamiliar

This is particularly true if your boat has drying out legs, as the relatively small surface area of the leg could end up on a rock or a soft spot, and will need adjusting and tensioning to keep their boat comfortably upright.

5 HIGH AND DRY

If you are lucky, you will be able to walk ashore at low tide without getting your feet wet. If you are going ashore for a while, make sure you check the tides — you may need to carry the tender to the high-water mark if you don’t want to swim back.

It is a good chance to check your hull fittings

In most places, a pair of wellies will help when walking through mud, or over rocks. You may need to lower the bathing ladder to climb down from the boat, and to get back on when the tide is out.

Fabio Muzzolini is the sales director for Marée Haute, the Breton builders of the Django range of twin-keeled yachts

If you’re in a narrow river, low water is a good opportunity to have a look at exactly where the channel goes.

The boat will be very stable once dried out, but be careful about putting too much weight on the bow — it’s probably a good idea not to have more than one person on the bow when dried out.

A couple of buckets will also come in very handy.

Fill one of them up before you lose the water so you can wash your feet once you’ve walked back across the sand or mud.

The other bucket is for calls of nature, as you won’t be able to flush the heads.

6 REFLOATING

Afloat again and ready to sail

Waiting for the tide to return is the easy part, if all crew are back aboard.

As soon as the boat is floating, remove any drying-out legs or supports — these are remarkably easy to forget, but could cause real damage if left down.

Don’t forget to lift the bathing ladder too.

Retrieve your stern anchor first (you can do this when the tide is out if the conditions are right) and then weigh the bow anchor and you’re off.

Enjoyed reading this?

A subscription to Yachting Monthly magazine costs around 40% less than the cover price .

Print and digital editions are available through Magazines Direct – where you can also find the latest deals .

YM is packed with information to help you get the most from your time on the water.

• Take your seamanship to the next level with tips, advice and skills from our experts
• Impartial in-depth reviews of the latest yachts and equipment
• Cruising guides to help you reach those dream destinations

Follow us on Facebook , Twitter and Instagram.

Aluminium Strongall Specialist – Sailing and motor yachts

Located in Tarare since 1963, META is the manufacturer of Bernard Moitessier's historical JOSHUA. Thanks to the Strongall ® assembly process, patented by the shipyard in 1977, and its unique know-how the shipyard designs and builds sailboats, trawlers, speedboats and other floating buildings using the deck hull prestressed aluminum technique: our constructions are efficient, innovative, comfortable and very resistant.

The History of the Site

It is in Chauffailles, in Saône et Loire, that Jean Fricaud, an enlightened self-taught metallurgist, takes advantage of his workshops to build his first 11m steel motor-sailer: the SAINTE MARTHE. At the age of 13, Joseph, the eldest son, dreams of cars, drawing and mechanics... and of leaving school as soon as possible in order to start an apprenticeship-which he will do, with his father's blessing.

The workshops, in full effervescence, set up a construction line for hydraulic shovels, Joseph finished his apprenticeship as a mechanic in Lyon and left to enrich his technical knowledge in various regional boiler making workshops hoping, as soon as possible, to practice metallurgy on his own account.

Still in Chauffailles, Jean Fricaud is approached by Bernard Moitessier, for whom he agrees, as a good patron, to build the steel hull of JOSHUA. At the same time, Joseph set up under the name META and became a subcontractor for his father's excavator company.

Jean Fricaud, in Chauffailles, has exhausted all the possibilities for expanding his hydraulic excavator construction company and sets up an additional workshop in Tarare, on the RN7, near Lyon. META, still in Chauffailles, began to diversify and expanded its range of construction equipment.

Jean Fricaud seized the opportunity of a lifetime and sold his prosperous business to an industrial group: he had just built the motorboat NADINE and could finally devote himself to deep-sea fishing. But the buyer does not want to expand to Tarare, where the workshop has just been completed. Sensing "the emergence of a market", Jean proposed to his son to build steel boats there. Joseph obeyed and fate precipitated events: thanks to the publicity generated by Bernard Moitessier's exploits, META became a full-fledged shipyard in Tarare.

After having built more than 70 JOSHUAS, more than 30 DAMIENS II, and many other steel hulls, Joseph launches a big paving stone in the pond and abandons steel in favor of STRONGALL® aluminum, which he has just patented. His pre-stressed aluminum construction technique makes it possible to create extremely resistant deck hulls. The young subsidiary PROMETA, directed by François Fevre, also abandons steel for STRONGALL®.

Patrice Passinge is 17 years old when he joins META as a metal worker, under the supervision of André Ravatier, the company's workshop manager. Joseph carefully follows Patrice's efforts, and despite his young age, he soon proves to be an outstanding journeyman.

Patrice Passinge became workshop manager when, after his excellent career at META, André Ravatier took his legitimate retirement. At the end of the 90's, aware that Joseph was getting older, various buyers came forward with the objective of expanding the company. But Joseph wanted to preserve the family spirit of the company and decided to pass on META to Patrice, who had a solid background and an excellent culture of the business.

Joseph definitively transfers the META Chantier Naval Spécialiste du STRONGALL® brand and all its activities to Patrice Passinge.

Construction and launch of FLEUR AUSTRALE, the magnificent custom sailing boat designed for and by Philippe Poupon. This large expedition ketch travels in all the waters of the world in complete safety, from the Arctic to the Antarctic via the Pacific Ocean.

Design and construction of the Ecotroll 39 in partnership with Jean-Pierre Brouns and the Olbia shipyard. The smallest troller approved for ocean navigation, it sailed from Lyon to Greenland through canals and oceans before returning to Lyon via the Canal du Midi in spring 2011.

50 years of META Shipyard on the island of Frioul opposite Marseille. Great meeting with many clients and personalities owning META yachts.

META is diversifying by proposing hulls for various floating projects, such as the development of a floating restaurant (entre deux ô) visible on Roanne.

Based on our floating projects, Dominique Renouf called on META to build Solar Carriage. Real floating habitats with electric propulsion, the Solar Carriage are powered by photovoltaic panels and can navigate on canals and rivers in an ecological way, an important value of our company. In parallel, META is working on its first production boat, the META 36.

Thursday March 12, a few hours before the first presidential address concerning the containment due to COVID-19, Philippe Brabetz signs the takeover of META Chantier Naval Specialist of the STRONGALL®. Patrice Passinge will launch a carpentry workshop dedicated to the interior fittings of the META 36, at the Tarare location.

The takeover is final and the shipyard, renamed META Yachts—Architect Shipyard—Strongall® Specialist, resists to the COVID wave and follows its course. Philippe conceides his TurboKeels® patent to the company and initiates a range of innovative designs for modern, attractive and highly performing sailboats, new motorboats. META Yachts confirms the desire to invest in environmentally clean projects such as electro-solar housing barge carried by Dominique Renouf, and gorgeous Noé boat, carried by Nicolas Lallemand.

Inauguration de META Yachts Services, à Port Saint Louis du Rhône, sur la côte méditerranéenne, cofondée par Philippe Brabetz et Fréderic Switala, pour l'entretien, le gardiennage et la vente de bateaux META Yachts d'occasion.

Technical Legacy

Bernard moitessier, writer of great talent, exceptional sailor and philosopher recognized well beyond our borders, bernard moitessier (1925 – 1994) has become a legend..

He has given rise to strong vocations by communicating his precious philosophy to all those who, in love with freedom, have “taken the plunge” and are blossoming far from our agitated lands. Everything or almost everything… has been said and written about Bernard, a very unusual character. “I am weighing these words because I fear that his formidable genius of simplicity has escaped some people and has disappeared into the oblivion of history, which would be unjust and regrettable. More than any other sailor, Bernard was haunted not only by the obligation of robustness of the boat, but also by maintenance, hence maximum simplicity. In this perfect sailor’s logic, the deck of JOSHUA – by its very studied simplicity – has always constituted, in my eyes, an essential work reference. Today, every builder (amateur or professional) should be inspired by the best of this masterpiece of practical common sense, on aluminum as on steel.

Drastically simple, but with minimum solutions that have been carefully thought through… On the JOSHUA bridge, nothing should catch, nothing should hurt, nothing should jam: no rails or screwed parts, but welding of sturdy rings instead (to make it easier to surf with the brush, to keep everything clean, and to do away with protective adhesives! Moreover, the most economical solutions were the order of the day, because Bernard was really not rich when Jean, my father, built for him in 1961, the hull number 1 of JOSHUA in CHAUFFAILLES. Among the original features of this deck plan – of a monarchal rigor – the famous “Chinese hood” for example, is worth the detour: 100% watertight thanks to its judicious volumes of depression in spite of the absence of flexible joint, inviolable, reducing thermal bridges, it divides by 3 the times of painting on its perimeter while maintaining the aspect of the new: who does better?

I was very young in the trade when my small team of journeymen started the construction of the JOSHUAS in TARARE, and Bernard’s sponsorship was a great help to me!

More than forty years separate us today from the launching of Bernard’s hull in LYON, and the spirit of the master is still deeply rooted in our reflexes – everything that could be tried differently often turned out to be less convincing, so thank you Bernard for your intelligent contribution to the design of the metal decks of our sailing ships.

Joseph FRICAUD

, Founder of META Chantier Naval

Our Strongall ® construction technique

There is no such thing as the a universal or perfect material, and here is why we have chosen aluminum to replace steel:.

• Aluminum boats are solid: constructions are homogeneous, without joints between welded elements and without weaknesses caused by composite associations of various materials
• Aluminum boats have a great longevity, are a good investment when budgets are under control and if they’ve been well designed and especially well built, they maintain a good rating when resold
• Aluminum grades 5083 and 5086 require little maintenance

Why Strongall ® ?

This aluminum construction method was developed and patented by META Chantier Naval in 1977. The concept is that of a self-supporting aluminum deck hull, based on the use of thick sheets: the transverse structure is then reduced to a minimum (integrated tanks, engine cradle, mast belt, crash-box or watertight bulkhead) depending on the size of the boat. This type of construction is synonymous to robustness and longevity, warrants of the significant investment a boat represents over the years.

The Advantages of Strongall ® :

• Stronger than equal weight steel construction
• About 30% lighter than the same steel shell with comparable strength
• The use of thick sheets allows a greater intensity in welding thus eliminating the risk of “sticking”, and guarantees a better fusion of the metal
• Little or no deformation of the plating sheets
• The thickness of the sheets increases the resistance to corrosion and significantly reduces the risk of metal fatigue (repeated cycles of torsion-bending of the planks where the hull is a hollow beam moving on complex waves and swell phenomena)
• The hull is treated with inorganic Zinc Silicate
• The painting of the dead works and the bridge is only necessary for cosmetic reasons, they can remain raw without consequence for the material.
• A significant advantage for the shipowner, the absence of internal restrictive structures makes the design of the fittings more flexible.

Architectural constraint:

The hulls require developable hull surfaces and lively chine(s)—easily integrated in elegant and efficient designs!

Over 300 sailboats, motorboats and trollers have been built in Tarare since 1977, their extreme robustness secures navigation in particularly difficult areas: Arctic, Northwest Passage, Antarctica… COME MEET US IN TARARE, AND GET A FEELING OF WHAT WE REALLY DO!

TurboKeels®

A solution for ballasting lead from one side to the other….

To displace the center of gravity without relying on complex tilting keels, Philippe Brabetz, new owner of the Meta shipyard, has come up with an ingenious solution: TurboKeels®, or how to ballast lead from one keel to another!

Already used on tilting keel sailboats such as IMOCAs, the system literally involves shifting the center of gravity of the boat—but a tilting keel requires a large draft and a complex, expensive and above all fragile mechanism not suitable for cruising yachts.

With TurboKeels®, Philippe Brabetz applies the above basic premise to twin keel boats. The 2 keels are then used as reservoirs to accommodate the ballast which travels from one keel to the other as needed, and following a closed circuit mechanism activated by a simple pump.

The advantages of Turbokeels are:

• Enhances power
• Diminishes heel angle
• Allows for shallow draft
• Simple, reliable and economical

Stronglite®

—The Stronglite ® technique is undergoing scrutiny by our R&D team—

you can stay tuned and follow our social media networks

Philippe Brabetz

Owner & CEO

Nathalie Simon

Administration & Sales

Marin Ducoux

Design Office Manager

Serge Calka

Export & Communication

Johan Tardif

Naval architect, Engineer

Dockyard Technical advisor

Aluminum Ship Builder

Naval Engineer

Philippe Brabetz has an architecture degree from the Paris-La-Villette School of Architecture. While studying to become a building specialist, he attends Dominique Presle’s naval architecture courses and becomes passionate about the subject.

He graduates shortly after the first Gulf War, when jobs were hard to come round, and nevertheless manages to join the Guignols’ team at Canal+, working at the design and production of TV sets and special effects as of 1995. Ten years later, still passionate about shipbuilding, he joins the Nantes Naval Architecture DPEA which he tops by an internship for the construction of America’s Cup Areva Challenge monohull. During his collaboration with shipyards and naval architecture firms in France, Spain and Morocco, he invents TurboKeels: a twin-keel system whose lest is ballasted from side to side. The invention patented, taking over META Shipyard seemed like the next best thing to do.

His mission is to consolidate the achievements of the legendary shipyard, but also to add the creative touch that will allow META to navigate today’s challenging waters and thus continue its fantastic adventure.

Born in the same valley as META and with a name familiar to windserfers worldwide, her career was mapped out: since 2008, Nathalie has been assisting the shypyard’s management from an administrative, commercial and accounting point of view.

An Executive Assistant by training, she favors positions which allow for the widest diversity of tasks, within human scale structures. It is an interactive and stimulating format that she appreciates and that participates to the great complementarity between her very “maritime” professional activity and very terrestrial personal interests: running, cycling, hiking are all activities which fill her up with the energy and enthusiasm we much appreciate.

Nathalie is a valued collaborator, who faithfully has and does contribute to the welfare of the company .

A naval architecture engineer with a degree from ENSTA Bretagne, Marin’s work at META combines his passion for sailing and his experience of ocean cruising with the technical skills acquired through his training.

As an admirer of Gérard Janichon (Damien) and Bernard Moitessier (Joshua), he says he’s proud to be able to contribute to the development of META and its new series of ocean-going yachts, with modern lines and a spirit of adventure still intact.

Lover of nature, water sports, and concerned about the environment, Victor tackles his new adventure : his meaningful collaboration as a fully-fledged member of the META team.

Profil Linkedin

Specialised Masters in Naval and Offshore Architecture/Engineering Offshore engineering, ENSTA Brest

Fluid Dynamics and Energy in Physics, Université Paris-Saclay

Fundamental Physics, Paris-Saclay University

Lionel has learned and confectioned his skill at aluminum ship building at META, where he’s been a faithful member of the team since 2004. He has become the metalworkers’ go-to person for all questions related to Strongall ® boat building techniques.

Not only is he an experienced boilermaker, he’s got a secret skill up his sleeve: he grows grapes which participate in the making of one of the local Rhone wines.

We’re looking forward to the META vintage 😉

Etudiant-ingénieur en architecture navale à l’ENSTA Bretagne, Marin allie en travaillant chez META sa passion pour la voile et ses expériences de croisières hauturières avec les acquis techniques de sa formation.

Admirateur de Gérard Janichon (Damien) et de Bernard Moitessier (Joshua), il se dit fier de pouvoir contribuer au développement de META et de sa nouvelle série de voiliers hauturiers aux lignes modernes et à l’esprit d’aventure toujours intact.

Le chantier est donc très heureux de pouvoir compter parmi ses équipes ce Marin très compétent—mais aussi parfaitement polyvalent, avec un très bel esprit d’équipe et un sourire communicatif.

Anticorrosion

Your anti-corrosion solution for 50 years.

This zinc-based product is the best protection against hull corrosion so far. We are its historical retailer and use it for all of our boats.

Whether used as antifouling or covered by a regular antifouling, METAGRIP ® welds perfectly to the steel or aluminum hull thanks to the absorption phenomenon.

It does not deteriorate and therefore fully respects the underwater environment.

Do you live in metropolitan France ? Order online

You are not in metropolitan France? Ask for an estimate

Subscribe to the newsletter

By entering your e-mail address, you agree to receive our newsletter by e-mail and you are aware of our privacy policy . You can unsubscribe at any time using the unsubscribe links that you will find at the bottom of our newsletters.

Vérifiez votre boite de réception ou votre répertoire d’indésirables pour confirmer votre abonnement.

• BOAT OF THE YEAR
• Newsletters
• Sailboat Reviews
• Boating Safety
• Sails and Rigging
• Maintenance
• Sailing Totem
• Sailor & Galley
• Living Aboard
• Destinations
• Gear & Electronics
• Charter Resources
• Ultimate Boating Giveaway

40 Best Sailboats

• By Cruising World Editors
• Updated: May 24, 2024

Sailors are certainly passionate about their boats, and if you doubt that bold statement, try posting an article dubbed “ 40 Best Sailboats ” and see what happens.

Barely had the list gone live, when one reader responded, “Where do I begin? So many glaring omissions!” Like scores of others, he listed a number of sailboats and brands that we were too stupid to think of, but unlike some, he did sign off on a somewhat upbeat note: “If it weren’t for the presence of the Bermuda 40 in Cruising World’s list, I wouldn’t even have bothered to vote.”

By vote, he means that he, like hundreds of other readers, took the time to click through to an accompanying page where we asked you to help us reshuffle our alphabetical listing of noteworthy production sailboats so that we could rank them instead by popularity. So we ask you to keep in mind that this list of the best sailboats was created by our readers.

The quest to building this list all began with such a simple question, one that’s probably been posed at one time or another in any bar where sailors meet to raise a glass or two: If you had to pick, what’re the best sailboats ever built?

In no time, a dozen or more from a variety of sailboat manufacturers were on the table and the debate was on. And so, having fun with it, we decided to put the same question to a handful of CW ‘s friends: writers and sailors and designers and builders whose opinions we value. Their favorites poured in and soon an inkling of a list began to take shape. To corral things a bit and avoid going all the way back to Joshua Slocum and his venerable Spray —Hell, to Noah and his infamous Ark —we decided to focus our concentration on production monohull sailboats, which literally opened up the sport to anyone who wanted to get out on the water. And since CW is on the verge or turning 40, we decided that would be a nice round number at which to draw the line and usher in our coming ruby anniversary.

If you enjoy scrolling through this list, which includes all types of sailboats, then perhaps you would also be interested in browsing our list of the Best Cruising Sailboats . Check it out and, of course, feel free to add your favorite boat, too. Here at Cruising World , we like nothing better than talking about boats, and it turns out, so do you.

– LEARN THE NAVIGATION RULES – Know the “Rules of the Road” that govern all boat traffic. Be courteous and never assume other boaters can see you. Safety Tip Provided by the U.S. Coast Guard

40. Moore 24

39. Pearson Vanguard

38. Dufour Arpege 30

37. Alerion Express 28

36. Mason 43/44

35. Jeanneau Sun Odyssey 43DS

34. Nor’Sea 27

33. Freedom 40

32. Beneteau Sense 50

31. Nonsuch 30

30. Swan 44

29. C&C Landfall 38

28. Gulfstar 50

27. Sabre 36

26. Pearson Triton

– CHECK THE FIT – Follow these guidelines to make sure your life jacket looks good, stays comfortable and works when you need it. Safety Tip Provided by the U.S. Coast Guard

25. Islander 36

24. Gozzard 36

23. Bristol 40

22. Tartan 34

21. Morgan Out Island 41

20. Hylas 49

19. Contessa 26

18. Whitby 42

17. Columbia 50

16. Morris 36

15. Hunter 356

13. Beneteau 423

12. Westsail 32

– CHECK THE WEATHER – The weather changes all the time. Always check the forecast and prepare for the worst case. Safety Tip Provided by the U.S. Coast Guard

10. Alberg 30

9. Island Packet 38

8. Passport 40

7. Tayana 37

6. Peterson 44

5. Pacific Seacraft 37

4. Hallberg-Rassy 42

3. Catalina 30

2. Hinckley Bermuda 40

1. Valiant 40

• More: monohull , Sailboats
• More Sailboats

Sailboat Preview: Elan GT6 Explorer

For Sale: 1984 Camper & Nicholsons 58

Alubat Updates OVNI Models

For Sale: Little Harbor 63 Ketch

From Paradise to Medical Emergency: A Bahamas Nightmare Turns Lesson Learned

Free Medical Advice: The Unwarranted, Unprofessional Edition

Gatekeepers of the Waterway

Rigging Redo: Our Switch to Synthetic

• Digital Edition
• Customer Service
• Privacy Policy
• Terms of Use
• Email Newsletters
• Cruising World
• Sailing World
• Salt Water Sportsman
• Sport Fishing
• Wakeboarding

Yachting World

• Digital Edition

Why do keel failures happen and what can we do to prevent it?

• Matthew Sheahan
• June 10, 2017

We investigate the causes of keel failures and find some worrying reports of near-misses

Keel damage is a very real danger

To contemplate the loss of your keel is to think the unthinkable. Yet in recent years there have been several cases that have reminded us that this worst-case scenario can and does happen.

Many of the recent incidents have been aboard raceboats, often fitted with high-performance keels that push the boundaries of design and technology.

But the loss of the keel aboard Cheeki Rafiki, which became the subject of an intensive search last year, sent shockwaves through the sport. This was a standard Beneteau 40.7, a boat that is anything but high-tech. With around 800 afloat, it is a modest design with a reputation for being a robust and reliable workhorse.

Furthermore, the 40.7 is not only popular, but is typical of many other cruiser-racer styles around the world. Far from being extreme, this was a tragedy that claimed four lives aboard a run-of-the-mill cruiser-racer and struck a chord with thousands of sailors.

It wasn’t the first case of its type, however. In May 2013 a Bavaria 390 lost her keel 650nm north-east of Bermuda while on passage back from St Maarten to the Azores. In this incident the two-man Danish crew were rescued from a liferaft by a Finnish navy ship.

Before that there was the case of Hooligan V, a production raceboat that lost her keel in 2007 and claimed a life. In 2005 a Bavaria Match 42 lost hers as the internal structure pulled through the bottom of the boat. In the same year Moquini, a Fast 42, lost her keel off South Africa with the loss of six crew.

Indeed, so concerned is the sport’s governing body, ISAF, about the incidences of keel failure that it has formed a Keel Structure Working Party to investigate the issue. Part of the group’s initial work was to develop a database of the reported failures. Currently, the list includes 72 cases since 1984, and in those 24 lives have been lost – a small number perhaps when compared with the many thousands of boats that have been built over this period, but unacceptable nonetheless.

The trouble is that these are only cases where the worst has happened and the keel has parted company with the boat. It is frequently difficult to establish the cause of failure, and particularly to separate a shortcoming in design or manufacture from a human error such as a grounding. In a world where online forums spread gossip and rumour at the click of a mouse, getting to the truth can be especially tricky.

Next: Damage to your keel when you go aground

• 1. Introduction
• 4. If you enjoyed this….

13 Popular Full Keel Sailboats Worth Considering

Full keel sailboats are very stable and durable - they are great for cruising long distances. But there are disadvantages too. Let's look at what models to consider, and why.

Here are 13 good full keel sailboats that are worth considering:

Nicholson 32

Island packet 380, folkboat 25, cape dory 36, vancouver 32, tradewind 33, endurance 50, westsail 32, hans christian 52.

First of all let's have a look at why you should even be preferring full keel sailboats to a more traditional, widespread classical fin keel design.

Full Keel Advantages

As with everything, there are plenty of pros and cons on each side. Full keels generally provide better handling if the weather gets tricky, they track better, provide more stability downwind, and generally stabilize the boat movements better.

Furthermore, they are way more robust, thus less prone to damage. Running ashore isn't as big of a deal as it is with a fin keel and your rudder and propeller will be more protected with the mass of the keel in front of them.

Full Keel Disadvantages

With more mass and drag comes less speed. Plus the large surface area underwater holding the direction will result in a wider turning radius, which might be annoying in smaller spaces.

Fin Keel vs Full Keel: Pros and Cons & When to Choose Which

Fin keel advantages.

The largest advantage of fin keels is their speed. They also provide better maneuvering and a better turning radius.

Fin Keel Disadvantages

It is inevitably more prone to damage though, wear and tear will be a way bigger issue than a full keel. They won't have your back when a gust comes since the water-resistance to the side will be smaller.

It seems then that for serious longer passages, liveaboards, and long-term sailing, full keels are better. As long as you don't care for speed as much, but are concerned about the boat having your back, this is the answer. So let's now look at the superstars of the full keel universe.

The very prototype of a long-distance tough cruiser. It has been with us since 1963 and happens to be among the first fiberglass boat models produced on a mass scale. Nicholson 32 went out of production in 1981 and it was a model approved for the 2018 Golden Globe Race, proving that even older Nicholsons are still standing strong due to their toughness and ease of repair.

They were supposedly as durable as if made out of steel. Though I'll leave up to you whether you want to see that as a marketing claim or reality, such a statement can not be made without some base.

Plus the newer models have a lot of interior space, are manageable for solo sailing, and provide a sturdy ride to take one around the world.

The story here is similar to the above Nicholson - meaning that we are looking at one long-lasting high-quality cruiser. Not just because of this specific model's build - Island Packet in general was always known for this. And it is among the very few companies that, in the modern era, keep making full keel boats.

In other words, you don't see many shipyards focusing on full keels these days, so if you want one and you would rather go with a new boat, Island Packet will be one of the stops you will very probably make when doing your research.

If you are looking for reliable cruisers, you will like this one, since cruising is what it was built for, even if it meant sacrificing some performance aspects. It has a wide beam, a lot of interior space, all of the amenities a comfy cruiser should have, such as a big refrigerator with a freezer, as well as a fully equipped kitchen. The long keel here serves as a comfort helper, since, as mentioned before, it adds to the stability and reduces motion.

Not to sound repetitive, but the word 'reliability' has to be mentioned again. It seems that boat builders who choose the full keel design have something in common.

But since this particular boat was born during the Second World War and has been going strong to this very day, what other words to describe it? It has the Nordic blood in its veins since it was thought into existence by the Scandinavian Yacht Racing Union and since it prefers just about everything over comfort.

The boat is very stable, not just because of its full keel, but also because of its insane 55% ballast ratio. For those who haven't come across this before, the ballast ratio is the ratio of the ballast weight relative to the boat weight. So for instance the nearly 9 tonne Bavaria 40 with its almost 3 tonne ballast has a ballast ratio around 30 percent.

Thus you can imagine that a boat that 'wastes' more than half of its weight on ballast is serious about rigidity. These are performance racer numbers. But of course, if you are designing a boat that has to withstand the Scandinavian storms, you don't have a choice than to go overboard with specs. So if this toughness is what you seek, look no further.

...although as far as I know, all Cape Dory boats have full keels, regardless of their length. Their 36-foot model is just their most popular one. Cape Dories are known for their sturdiness, ability to cross the oceans because of their stability, and relative ease of handling.

They were engineered by Carl Alberg, who was inspired by the Scandinavian Folkboat, where reliability is worth more than comfort, or the interior space. This boat rocks a heavy rig for hardcore traveling, but its 1.5-meter draft makes it ideal for coastal cruising as well.

What's quite interesting about this particular model is that during its lifespan it went through very few changes. Boats usually evolve, sailors' feedback is taken into consideration for upgrades, but Cape Dory 36 remained relatively unchanged inside or out. This is a big compliment, since the brand started out in 1963, stopped production in 1991, and sold its blueprints so that they could be built further. Talk about longevity.

Let's progress in technology! Just because a long keel is an old-fashioned or more traditional approach, it doesn't mean it remains monolithic in its ideology. There were innovations in the concept, such as cutaways in the keel, to reduce the biggest drawback of this design, the drag.

So it only makes sense that Vancouver, a company that had distinctiveness and innovation in its mission and vision, would take part in this. Their 32-foot model that begun its lifespan in the early eighties, had a deeply cutaway forefoot, plus a rudder that was wider the deeper it was underwater, meaning its widest point was at its lowest point. This was to increase efficiency, and rudder response.

Technicalities aside, this boat was very well made, no corners cut, no expenses spared. This resulted in quite pricey vessels, out of reach of many, but much time has passed since, so today it can be yours for around 40 000 USD and up. And since the build quality was so high back then, you can still enjoy a proper boat, usually at a higher quality than boats equal its age.

The great thing about Australian sailboat makers is that they design their boats for long passages. How else would they get off of the continent? Freya 39 is a good example of this since it has not only circled the globe many times but also won the Sydney-Hobart Yacht Race three times consecutively. And that's a famously hard race.

The boat is built like a tank, with thicker fiberglass walls than you would find in its rivals. Despite that, its owners claim to have crossed over two hundred miles per day on it, a figure that is well known when it comes to this model. Which sounds plausible with its 7.8 kts of hull speed.

Its construction makes her one stable boat since it has been noted that during races, it was able to carry a spinnaker longer than its competitors, well into the 30 knots of wind speed.

The only drawback here is that if you fancy it, since it is so highly valued, and in demand, it will be tricky to find one to buy. And once you do, prepare to pay around 60 000 - 90 000 USD for it.

This one comes with a story attached to it. Once upon a time, a naval engineer Nick attempted to sail around the world. Halfway through, his boat gave up, which meant a lot of trouble for Nick, but he exited this disaster with a pretty precise idea for what his next project would be. He set on to design a boat that would be so sturdy that his sailing misfortune would never repeat.

Out of this incident paired with a smart brain, Wylo 2 was born. To make sure his design stands, after putting this boat on the water, he proceeded to live on it, while circling the globe a few times.

Others, seeing this success, bought his designs and they became quite widespread. As you might have guessed, this boat has a lot of space for living, for storing equipment and provisions, so it is comfy to live on, not only for your body but because of its sturdiness, for your mind too. These designs have accomplished some astonishing feats in all corners of the world, so if you put your trust in this design, you won't be making a mistake.

If I said this boat is sturdy and ready for just about any destination, I'd really be repeating myself now. So while that's true, let's talk about what's special about Tradewinds 33.

It has a rather small cockpit, so on-deck dinners while watching the sunset with the whole crew might be a bit improvised, but the space saved is used for an impressively spacious interior as well as a nearly flat deck. So moving about is a pleasure.

For liveaboards, this is a good idea, since storage space will be plentiful. Plus it's an elegant looking boat, with a forestaysail as a default setup. So rock on.

Time for a larger boat. So that if you want something that won't lack anything you might wish for, including space, I have something for you too. All Endurances are full keels, so if you fancy a smaller model, there is a way.

Even though it is relatively new, (you will find models from around 1995) it will make you feel like a medieval pirate, with its old-school helm, wooden interior, and a spacious aft cabin that has large windows facing back!

It is a proper bluewater cruiser, built in South Africa based on a famous Peter Ibold's Endurance blueprint. It sleeps a whole family, so if a circumnavigation with a few friends is what you seek, this is one for you.

If you are up for some single-handed sailing, pause here for a bit. Small sailboats are usually nimble, on the top of it, this one is also quite sturdy and stable, as full keels are.

You won't find much space below the deck, so don't expect to have a party of more than around two people, but at least it's a good looking interior, with charming round windows and many of the usual amenities.

They say that Mason sailboats are premium quality for a non-premium price. I wonder whether them being built in Taiwan has something to do with it.

Here is a quote by an owner of a 1986 model that says it all: "I am absolutely captivated by the boat and am not objective at all in my feelings toward her. The general construction is of the highest standard. Like an Irish hunter, she is a workhorse and a lady-maybe not quite as fast around six furlongs as a racehorse, but for the long pull, through timber, brush, and over walls, she is really something."

Now although this owner admits subjectivity, this boat indeed was built with quality in mind. Sturdiness too - not only is its fiberglass hull properly solid, but it also features longitudinal stringers to add further rigidity.

There is a lot of brightwork, which might sound nice at first glance, but since it requires quite a lot of maintenance, some owners even said they could do with less wood if it meant less upkeep.

All in all though, when it comes to getting a lot of boat for not a lot of money, this is it.

Does it make sense to even praise how heavy and sturdy this boat is built? Probably not at this point. Just know it ticks all the boxes. It is made of 12 layered fiberglass for Pete's sake.

The design was based on ideas of the Norwegian engineer Colin Archer, who made his boats such that they could withstand the northern seas. Pair that with the fact that the interior here is surprisingly spacious with 6 ft 2 in of headroom and you've got yourself one comfortable circumnavigator.

The issue stemming from the heavy build and a full keel, which is a slower pace, applies here more than usual though. This boat is absolutely reliable, but don't expect winning speed races.

Sadly, Westsail 32 was in production only for some 9 years. Sales were booming, they made over 800 boats, but bad business practices and cash flow issues resulted in its demise.

Not the author, the boat. If beauty and elegance are what you are after, this one will catch your eye. Just as was the case with Mason, these boats were produced in Taiwan. But since the goal of the engineers was to create the 'ultimate cruising sailboat' and they spared no expense, expect to pay hundreds of thousands of dollars for these boats, even though decades old.

The gorgeous classical design paired with the high build quality makes these exclusive pieces of work, plus quite a modern one since they ceased production in the 90s. So if you don't mind the higher price mark and are looking for something relatively new, that will, thanks to the build quality, last you for many years to come, this might be your choice.

Full keel sailboats are sturdy. Not only is that because of the full keel which itself provides a lot of structural integrity. But also because the choice of putting the full keel in means you are building something that prefers ruggedness and reliability over anything else. So it is logical that the rest of the boat will be built in the same fashion.

So if you don't mind sacrificing the few knots of extra speed, if you don't mind the smaller pool to choose from, if you want a boat that will have your back in pretty much any situation and place you will choose to go to, if you want to sail the Scandinavian design, go for it.

Arthur Rushlow

What a great page. Both my wife and I sailed Faulk Boats out of Canada prior to our moving to Florida. Once we arrived in Florida we had a Soveral 26 built we raced for three years prior to my returning to College and now 5 degrees later I am an Anglican Bishop with no boat.

Leave a comment

You may also like, 5 surprising advantages of a full keel sailboat.

Modern keel designs favor fin keels, with the high-performance boats using bulbs with narrow chord sections and deep drafts. Very few full keel designs are being …

Fin Keel vs Full Keel: Pros and Cons & When to Choose Which

7 Legendary Solo Bluewater Sailboats Worth Considering

13 World-Famous Bluewater Sailboats Under 40 Feet

17 Legendary Bluewater Sailboats Under 50 Feet (with Photos)

• Governments
• Panjiva Platform
• S&P Capital IQ Pro
• XpressFeed™
• United States Trade Data
• Brazil Trade Data
• Central & South America Data
• India Trade Data
• Pakistan Trade Data
• Vietnam Trade Data
• S&P Global
• Demo Request a Demo

Please log in and we'll send you on your way.

Note: Panjiva has limited support for Mobile devices

We recommend logging into Panjiva from your desktop.

Sign in with your email

For a better and more seamless experience, please log in with the S&P Global button below. Or, if you prefer, continue to log in with Panjiva .

Please log in with the S&P Global button below.

Sign in with another service

• Xpressfeed™
• United States
• Central & South America

• Terms of Use
• Privacy Policy
• Cookie Notice
• Cookie Settings
• Do Not Sell My Personal Information

9 Popular Boats With Lifting Keels (With Pictures & Prices)

If you are looking for a sailboat, you might want to consider one that features a lifting keel.

Lifting keels allow you to explore shallower waters, reduce drag, or other advantages when the keel is lifted.

Here are the boats you should check out first!

Table of Contents

What is a Lifting Keel?

As you probably know, the keel of a boat is the longitudinal structural device on the bottom of your hull.

On a sailboat, the keel serves as an underwater fluid machine that helps to minimize the lateral motion of the vessel that is under sail, as well as acting as a counterweight to the lateral force that comes from the wind on the sails which can cause it to roll to the side.

A lifting keel, sometimes known as a centerboard, is a keel that retracts into the hull of a sailboat or pivots and allows for certain advantages.

A lifting keel’s main function is to provide a lift to counter the lateral force that is created by the sails. This allows the sailboat to move other directions other than downwind.

Because these keels lift into the hull, you would be able to take your vessel into shallower waters.

In addition, a lifting keel is ideal for:

• Moving the center of resistance.
• Reducing drag.
• Removing the boat from the water and trailering it.

Centerboards are different than other types of keels, such as a ballast keel, because they do not contribute to the overall stability of the vessel because they are not as heavy and instead they only provide lateral resistance.

Great Boats with Lifting Keels Under $30,000

If you are looking for a boat that features a lifting keel and all that comes with it, you are in luck!

Below, I have compiled a list of great boats that feature a lifting keel.

1. Parker 235 Mini Cruiser

The Parker 235 Mini Cruiser is a small sailboat that should be great for sailors who would like to trailer their boat and explore multiple destinations.

This sailboat exhibits excellence both afloat and while onshore. This features high performance due to its long waterline, stable hull, and a deep low center of gravity.

This boat features a custom boat trailer and is easy to launch and as well as to trailer.

This boat is 23’ 5” in length. Despite its smaller size, there is no compromising with the internal accommodations. The boat featured 2 berths, a galley, and a head compartment.

This boat also has a lifting keel which reduces the draft by 3’ 6”.

This boat can be found used at a price of around $20,000.00.

RELATED: Common Problems With Parker Boats .

2. Hunter 22

The Hunter 22 sailboat is a perfect small daysailer that features the capacity to stay aboard overnight. This vessel is ideal for up to five passengers and features a large cabin.

This boat is 21’ 4” in length and is easy to launch, rig, and trailer when needed.

This boat features a lifting keel that reduces draft by 2’ 6” when lifted up.

This boat has a starting price of $29,990.00.

3. BayRaider 20

The BayRaider 20 manufactured by Swallow Yachts, is a small open sailboat that is ideal for families or sailors who are looking for something stable and safe.

This boat has features that make it ideal for beginner sailors including the ability to keep the ballast tanks full for added stability.

This vessel also features a two-masted ketch that gives an advantage over a single-mast rig because it allows for a quick reduction of sail.

This boat is almost 20 feet long and is light enough to be trailered or handled by one person.

This boat features a lifting keel that reduces the draft by 3.8 feet when lifted.

This boat has a starting price of $27,750.00.

4. Catalina 22 Sport

Catalina strives to encourage sailors who are interested in racing with the Catalina 22 Sport. This boat is small and measures at 23’ 10”.

This boat also has a cabin that features berths for up to 4 adults. This boat is a great choice for those looking for speed and easy maneuverability while still offering the ability to stay aboard overnight.

This boat has a lifting keel that reduces the draft of the boat by 3’ 2” while lifted.

This boat has a starting price of $23,550.00.

5. Marlow-Hunter 15

The Marlow-Hunter 15 is a safe and versatile daysailer for families or individuals who new to sailing. This boat was designed with sailing novices in mind and features high sides, a contoured self-bailing cockpit, and a wide beam that was built for comfort.

These safety features will allow peace of mind for parents and brand new sailors.

This vessel is also easy to trailer, rig and launch.

With a length of 14’ 6”, you can fit a crew of up to four onboard but this boat can also be handled solo.

This vessel features a lifting keel that reduces the draft by 3 feet when lifted.

This boat features a highly affordable starting price of $10,123.00.

Models Between $30,000.00 and $100,000.00:

6. feeling 326.

The Feeling 326 was manufactured between the years of 1987 and 1999. This boat is a cruising sailboat that is 32’ 6” in length and comes with 2 cabins, 6 berths, and 1 head.

This boat is great if you plan to go out for long journeys with multiple people.

Even though this boat is an older model, you should still be able to expect quality sailing from them.

This boat also features a lifting centerboard that reduces the draft by 2’ 7”.

Depending on the year and the seller of the vessel, these boats are selling for an average price of between $30,000 and $45,000.00.

7. Norseboat 21.5

The Norseboat 21.5 is the largest model in the Norseboat line with a length of 21’ 10”. You can get either a Cabin or an Open model for this boat.

You can customize this vessel based on your needs and other factors. You can construct a standard or semi-custom Norseboat.

This boat features a lifting centerboard that reduces draft by 2’ 4” when lifted.

Depending on the layout and chosen options, this boat has a starting price of $37,490.00.

Boats Over $100,000.00:

8. alubat ovni 365:.

From the manufacturer Alubat, the Ovni 365 combines their experience in centerboards and high performance to create a vessel that is both comfortable and high performing.

This boat is great whether you are traveling upwind or downwind. This boat is great for both long trips or for simply cruising up and down the coast.

This boat is 39.17 feet long and features a galley as well as a front and rear cabin.

This boat features a lifting centerboard that reduces the draft by about 5.18 feet when lifted.

Depending on the year and specifications of this vessel, the price could range from $100,000 to $300,000.

9. Southerly 42 RST

Southerly makes a mono-hull 42 RST that is an offshore deck saloon sailboat that was built for cruising. This boat has a length of 42’ 2” and could be equipped with either 2-3 cabins, 4-8 berths, and comes with 2 heads.

This boat is great for taking multiple people out on the water. While these are no longer in production, they were made between the years 2007 and 2017.

This boat has a lifting keel that reduces the draft by 6’ 1” when the keel is up.

Depending on the year and the condition, this boat could cost a minimum of $250,000 but if often over $300,000.00.

10. Gunfleet 43

The Gunfleet 43 is a top of the line vessel with many options for customization. This boat is large and luxurious with a length of 44’ 1”.

This boat features a standard layout with either 2 or 3 cabins, or you could get a custom-built version that also has 3 cabins.

This vessel offers high-end luxurious features that are ideal for long trips and even vessels that you would consider for living aboard.

This line features an optional lifting keel that would reduce draft by 4’ 4” when lifted.

This luxurious and custom-crafted vessel has a large price tag of over $800,000.00.

Keel Types and Performance:

The lifting keel is not the only keel that is available for your vessel. Each keel type is built for a different type of performance.

Some of these keel types include:

• Fin Keel with Spade Rudder
• Fin Keel with Skeg Rudder
• Lifting or Swing Keel
• Twin or Bilge Keel

Make sure before you buy your vessel, you consider the type of performance you are looking for on your vessel and research the ideal keel for you.

This can help you when selecting which boat to purchase and will help you get the maximum performance and use out of your vessel.

If you do not buy the boat with the proper keel type , then you will not get the necessary performance needed. Some keels are made to be more stable, some are made to be more versatile, and some such as the lifting keel is made to be able to be optional depending on what type of activity you plan to achieve in your vessel.

A lifting keel is a great option for those who are looking for shallow draught, speed, efficiency, and the ability to plane your vessel early.

The lifting keel is not ideal if you are planning to use it to offer additional stability. If you are looking for additional stability, you will want to look at different and heavier keel options.

If that sounds ideal for you, you will benefit from one of the many daysailers or overnight vessels that offer a lifting keel listed above.

Click to share...

Stay up to date with notifications from The Independent

Notifications can be managed in browser preferences.

UK Edition Change

• UK Politics
• News Videos
• Paris 2024 Olympics
• Rugby Union
• Sport Videos
• John Rentoul
• Mary Dejevsky
• Andrew Grice
• Sean O’Grady
• Photography
• Theatre & Dance
• Culture Videos
• Fitness & Wellbeing
• Food & Drink
• Health & Families
• Royal Family
• Electric Vehicles
• Car Insurance Deals
• Lifestyle Videos
• UK Hotel Reviews
• News & Advice
• Simon Calder
• Australia & New Zealand
• South America
• C. America & Caribbean
• Middle East
• Politics Explained
• News Analysis
• Today’s Edition
• Home & Garden
• Broadband deals
• Fashion & Beauty
• Travel & Outdoors
• Sports & Fitness
• Climate 100
• Sustainable Living
• Climate Videos
• Solar Panels
• Behind The Headlines
• On The Ground
• Decomplicated
• You Ask The Questions
• Binge Watch
• Travel Smart
• Watch on your TV
• Crosswords & Puzzles
• Most Commented
• Newsletters
• Ask Me Anything
• Virtual Events
• Wine Offers
• Betting Sites

Thank you for registering

Please refresh the page or navigate to another page on the site to be automatically logged in Please refresh your browser to be logged in

Bayesian yacht sinking latest: Diver speaks of ‘unbearable’ search for Mike Lynch’s daughter Hannah

Captain james cutfield, ship engineer tim parker eaton and sailor matthew griffith all now under investigation for manslaughter, article bookmarked.

Find your bookmarks in your Independent Premium section, under my profile

For free real time breaking news alerts sent straight to your inbox sign up to our breaking news emails

Sign up to our free breaking news emails, thanks for signing up to the breaking news email.

A diver who led the search for the missing bodies on Bayesian wreck said that finding Mike Lynch’s 18-year-old daughter Hannah was the hardest.

Giuseppe Petrone, chief of the Italian Firefighters Dive Team, said: “It was such a relief to have found her after almost five days. The tension had been unbearable until then.”

Mike Lynch’s wife did not want to leave the scene of the Bayesian wreck without her family, the captain of a boat near the sinking has said.

Karsten Borner, the captain of the Sir Robert Baden Powell, which helped to rescue the 15 survivors of the disaster in Sicily , told People that Angela Bacares “didn’t want to leave because her husband and her daughter were still down”.

British technology tycoon Mr Lynch and one of the daughters he has with Ms Bacares, Hannah, were among the seven people who were killed after his superyacht capsized and went down on 19 August within minutes of being hit by a pre-dawn storm.

The captain’s comments come as three crew members of the British-flagged vessel – captain James Cutfield, ship engineer Tim Parker Eaton and sailor Matthew Griffith – are now all under investigation for manslaughter and shipwreck .

Friend pays tribute to Bayesian chef Recaldo Thomas

Recaldo Thomas was the superyacht’s chef and the first person whose death was confirmed.

The Canadian-Antiguan national was found by the Italian coastguard near the sunken boat. A friend of Mr Thomas, who asked to remain anonymous, said the yachting community has been saddened by his death.

She told  The Independent:  “He was a one-of-a-kind special human being. Incredibly talented, contagious smile and laugh, an incredible voice with a deep love of the ocean and the moon. I spoke to him nearly every day. He loved his life his friends and his job.”

Why was Mike Lynch’s yacht named the Bayesian?

Autonomy, the software firm which Mike Lynch sold in a £8.64bn deal in 2011, was a pioneer of business data analysis, using machine learning and what Mr Lynch called “adaptive pattern recognition”.

It used a statistical method called “Bayesian inference” at the heart of its software, devised by the 18th-century mathematician Thomas Bayes.

The yacht’s name,  Bayesian , harks to the same model that was at the heart of Autonomy’s – and Mr Lynch’s – success.

Hannah Lynch was ‘one of the best English students in the country’, teacher says

Hannah Lynch had just completed her A-levels and secured a place to study English at Oxford University.

Her former English teacher Jon Mitropoulos-Monk said she was “one of the best English students in the country” having scored 100% in her English Literature GCSE.

Patrick Jacob, a family friend, paid tribute to her on Friday, saying: “Hannah was charming and ferociously intelligent with an insatiable thirst for life and knowledge. She was also warm, loving and deeply considerate; remarkably for her age.

“I am 50 years older than her and in my life I have never met anybody like Hannah. We have lost one of our brightest stars whose future held so much promise. Her loss is unbearable.”

Bayesian captain insisted ‘we didn’t see storm coming’

The captain of the Bayesian insisted he did not see the storm that sank the Bayesian last week.

Speaking of the storm, James Catfield, 51, said on Tuesday: “We didn’t see it coming.”

A judicial official, who asked not to be named, confirmed to Reuters on Monday the earlier reports in Italian media that the New Zealander was being investigated by Italian prosecutors after the superyacht capsized in a tornado off the coast of Sicily last Monday.

Mike Lynch net worth: How the billionaire made his money

British tech tycoon Mike Lynch was among seven people  who died  after the luxury superyacht Bayesian sank off the coast of Sicily.

The 59-year-old is known for founding Invoke Capital and Autonomy Corporation and had been in the headlines after  he was cleared of charges in a high-profile fraud case.

Once dubbed the “British Bill Gates”, Mr Lynch and his wife Angela Bacares were valued at £852m in 2023 by the Sunday Times Rich List.

Born in Ilford, east London to his Irish mother  a nurse from County Tipperary and his father a firefighter from County Cork,  he won a scholarship to the independent Bancroft’s school in Woodford Green at the age of 11.

He then went to Cambridge University and started his first business while studying for a PhD in signal processing and communications research.

Read the full story here:

Mike Lynch was frequently described as the Bill Gates of Britain for founding Autonomy – one of the biggest software firms on the planet

Pictured: British crew member being investigated after yacht tragedy

Three people are being investigated by the Italian authorities for manslaughter after the sinking of the Bayesian yacht off the coast of Sicily.

Ship engineer Tim Parker Eaton, is one of the two British crew members now also being investigated.

A source told Reuters that Parker Eaton is suspected of having failed to protect the yacht’s engine room and operating systems.

Being investigated does not imply guilt and does not mean formal charges will follow.

Five found in same cabin while Hannah Lynch found alone in another, according to reports

Five corpses were all found in the same cabin on the Bayesian while the body of Hannah Lynch was found alone in another, according to Italian officials.

The five people that rescue divers found together appeared to have gathered in the first cabin on the left of the superyacht in an attempt to escape, reported  The Telegraph , while the 18-year-old was discovered in the third cabin on the left on her own.

Girolamo Bentivoglio Fiandra, a senior officer from the fire service, said on Saturday: “The yacht tended to the right and obviously the bodies tried to go to the other side and take refuge in their cabins. We found five bodies in a cabin on the left and another one in the third cabin on the left. They were in the higher part of the shipwreck.”

Who was on the Bayesian?

The sinking of the Bayesian off the coast of Sicily made headlines across the world, with interest rising when it was revealed that British technology tycoon Mike Lynch was among those onboard.

It then emerged that the boat trip was a celebration by Mr Lynch with friends, colleagues and his legal team after he won a decade-long legal battle.

Here we explain who was onboard the ship during the tragedy:

Mike Lynch yacht latest: Two crew investigated as Bayesian captain refuses questions

Italian prosecutors are investigating captain James Cutfield over deaths of British tech tycoon Mike Lynch and six others

What are investigators focusing on?

Chief prosecutor Ambrogio Cartosio confirmed an investigation has been launched on Saturday.

He said his team will consider each possible element of responsibility, including those of the captain, the crew, individuals in charge of supervision, and the yacht’s manufacturer.

The Bayesian, a 184ft (56m) British-flagged luxury yacht, went down near the Mediterranean island in southern Italy last Monday.

Investigators are focusing on how a vessel deemed “unsinkable” by its manufacturer, Italian shipyard Perini Navi, sank while a nearby sailing boat remained largely unscathed.

Prosecutors said the event was “extremely rapid” and could have been a “downburst” - a localised, powerful wind that descends from a thunderstorm and spreads out rapidly upon hitting the ground.

The crew were saved, apart from the chef, while six passengers were trapped in the hull.

Watch: Final moments of seven who died in Bayesian tragedy revealed by fire service boss

Join our commenting forum.

Join thought-provoking conversations, follow other Independent readers and see their replies

Subscribe to Independent Premium to bookmark this article

Want to bookmark your favourite articles and stories to read or reference later? Start your Independent Premium subscription today.

New to The Independent?

Or if you would prefer:

Hi {{indy.fullName}}

• My Independent Premium
• Account details
• Help centre

Sailing yachts like Mike Lynch's are 'unsinkable bodies', CEO of boat manufacturing firm says

Bayesian superyacht which sank off Italy is an "unsinkable" vessel, Giovanni Costantino, CEO of The Italian Sea Group, said.

By Ashna Hurynag, news correspondent and Eleonora Chiarella, producer

Sunday 25 August 2024 08:48, UK

Vessels like Mike Lynch's stricken superyacht are "unsinkable", according to the chief executive of the firm which makes and sells them.

Giovanni Costantino, CEO of The Italian Sea Group, told Sky News there are no flaws with the design and construction of the Bayesian superyacht which capsized in a storm off the coast of Porticello, Sicily, on Monday.

Five bodies were found by divers on Wednesday - taking the number of confirmed dead to six.

The Italian Sea Group also owns the firm that built British tech tycoon Mr Lynch's Bayesian, and Mr Costantino said the vessels "are the safest in the most absolute sense".

"Being the manufacturer of Perini [boats], I know very well how the boats have always been designed and built," he said.

"And as Perini is a sailing ship... sailing ships are renowned to be the safest ever."

He said their structure and keel made them "unsinkable bodies".

Read more on this story: Why search of superyacht wreck has been so difficult Hero mum 'slept with baby on deck when storm sank yacht'

Be the first to get Breaking News

Install the Sky News app for free

Mr Costantino said news of the sinking "put me in a state of sadness on one side and of disbelief on the other".

"This incident sounds like an unbelievable story, both technically and as a fact," he said.

It is understood Italian prosecutors investigating the incident are continuing to hold interviews with the survivors.

On Tuesday they questioned the captain for more than two hours to help reconstruct what happened and provide useful technical details.

Four British inspectors are also in Porticello and have begun a preliminary assessment of events.

It is understood they will look at all relevant aspects of the incident, including the design, stability, and operation of the vessel. They will also examine the effects of the weather conditions experienced.

Keep up with all the latest news from the UK and around the world by following Sky News

Twenty-two people were on board the vessel, 15 of whom were rescued - including Briton Charlotte Golunski and her one-year-old daughter Sofia.

Divers will resume efforts on Thursday morning to bring ashore a body they found earlier. One more person remains missing.

Related Topics

• Superyacht sinking

Vladimir Tourism

• Things To Do in Vladimir
• Vladimir Itineraries
• Vladimir Hotels

Vladimir Trip Planner

Plan your customized day by day trip plan for Vladimir. Choose from various experinces categories as adventure, romantic and family and kids friendly for your trip using using Vladimir trip planner.

• THINGS TO DO
• HOW TO REACH
• TOP RESTAURANTS
• Moscow Trip Planner
• Yaroslavl Oblast Trip Planner