trimaran edam team

Yachting Monthly

• Digital edition

Wow, that was fast! Why trimarans are SO much fun to sail – and how to do it

• Theo Stocker
• February 13, 2024

For their size, trimarans can punch well above their weight in speed, cruising potential and fun. Monohull sailor Theo Stocker gets to grips with how to handle one

Humans tend to gravitate into tribes of like-minded enthusiasts, enjoying the encouragement, support and sense of identity, while often looking askance at others; sailors at motorboaters, cruising sailors at racers, monohull sailors at raft, I mean, multihull sailors, and everyone looks askance at jet-skiers.

Large cruising catamarans (40ft now counts as a small one) are a world apart from monohull sailing, but there’s a sub-tribe of sailors dedicated to life on three hulls and builders such as Dragonfly, Corsair, Farrier, and Astus give them plenty of choice.

I’ve been sailing a 22ft (7m) Astus 22.5 this season, with just enough space for a family of four and a minimum of creature comforts. Thanks to her VPLP-designed hulls and 650kg all-up weight, we can sail upwind at 7-plus knots and downwind at over 10 knots with ease, all on a roughly even keel, while the kids play Duplo down below. It can also be beached and is towable behind a car.

Having, it seems, caught the trimaran bug, I wanted to get better at sailing and handling the boat, but my monohull sailing experience and habits were proving something of a hindrance, so we sought advice from some existing trimaran owners, and well as the UK’s top multihull sailors.

Much of the advice will apply to all multihulls , whether two or three-hulled, while other parts are just for small trimarans. I also found that brushing-up some of my rusty dinghy sailing skills helped get my head around what we were trying to do.

To try out our expert tips we went out sailing to see what difference they made. On the day, we got a solid Force 4-5 southwesterly, averaging 16 knots, but fluctuating between 12 and 20 knots true.

Blasting about on a sporty trimaran is a whole world of fun, but is much calmer than it looks

Trimaran sail trim

One of the biggest differences between a cruising monohull and a multihull is how the mainsail is trimmed. Leech tension on a yacht is often largely controlled by the kicker and the backstay, while the mainsheet sheets the mainsail in and out, predominantly controlling the angle of the boom to the centreline, and there may be a short traveller.

On a mulithull, however, there’s more than enough space for a good, wide traveller. Those who sail on performance monohulls will also be used to this. The sail shape is mainly controlled by the mainsheet, and the traveller then moves the boom towards or away from the centreline.

This is exaggerated on a multihull which has wide shrouds, swept well aft with no backstay, making space for a powerful square-top mainsail with full-length battens. There’s no backstay to bend the mast and flatten what is anyway a pretty rigid mainsail.

The mainsheet purchase creates enough power to control the leech of the square-top mainsail

Depowering a trimaran

Sailing on a monohull, heel and weatherhelm and eventually a broach give loads of warning that you’re pushing too hard. With straight hulls and little heel, those warning signs don’t really apply to multihulls.

In reality, however, there are a host of warning signals that it’s time to back-off; they’re just a bit different. Even then, there’s still a large safety margin before you get close to danger.

By way of reassurance, with the boat powered up on a beat, Hein, from Boats on Wheels, the boat’s owner, stood on the leeward hull and lent on the shrouds. Even as his feet got wet and the wind gusted at the top of Force 4, the boat didn’t bat an eyelid, thanks to the huge buoyancy of the floats.

Even with a person on the leeward float the boat was extremely stable

On the water – sail trim

My first inclination was to point the boat as high upwind as possible, pin the sails in and go for height. Doing that resulted in a not-terrible boat speed of 5-6 knots and a good pointing angle.

Free off by a handful of degrees however, and ease the sails just a smidge, and the speed leapt up to 8-9 knots – over 50% more; a huge increase. So, don’t pinch. If you had a decent chartplotter on board, you could find your optimum speed to angle using velocity made good (VMG).

I was also tempted to pinch in the gusts, but it’s better to hold your course and let the speed increase until the main needs easing.

On the wind, it’s time to get the boat fully powered up

If that’s the case, drop the main down the traveller an inch or two or ease some twist into the mainsail and it makes all the difference in the world, but not so far that the top battens fall away and invert – that really isn’t fast. Push too hard and the boat will slow down, largely from the drag of submerging the leeward float and crossbeams. If you’re still overpowered and the main is luffing, it’s time to reef. Downwind is different, but we’ll get onto that later.

After we put a reef in the main, our boat speeds upwind remained largely the same, and the boat was much happier. I came away feeling reassured that even a little trimaran like this would be pretty difficult to capsize, and there were always plenty of warning signs telling me to take my foot off the pedal a little.

Article continues below…

Catamaran sailing skills: Mooring and anchoring a multihull

How do you make an average passage speed of 7 knots, fit in three double cabins and a huge saloon…

Monohull or multihull: which is best for blue water?

As former editor of Yachting World, David Glenn has plenty of experience of both monohull and multihull cruising. Here he…

Tacking and gybing a trimaran

Everyone knows that multihulls don’t tack as well as monohulls. Straight hulls and wide beam don’t lend themselves to turning, especially when coupled with the displacement and fixed keels of big cats. Trimarans are a little easier, with a single central daggerboard to act as a pivot, and one or other of the floats will generally be clear of the water. On the downside, light displacement means that there isn’t much momentum to keep you going through the turn and plenty of windage to stop you.

On a trimaran the central daggerboard helps the boat to turn by providing a central pivot point that catamarans lack

Speed is your friend. Build speed up before the tack to give you as much momentum as possible. The helm needs to steer positively into and through the turn, and if necessary, keep the jib backed on the new windward side to help the bow through the wind. Don’t worry about scrubbing speed off, but you don’t want to get stuck in irons.

When it comes to gybing, speed is again key. The turning bit isn’t going to be an issue as you’ll be scooting along, but the faster you’re going, the less load there will be on the sails. The more you slow down, the more the true wind will pile up.

Trimaran sailing skills

Tacks took a bit of practice. It felt plain wrong to jab the tiller across the boat, slamming a big break on in the water but I ended up putting us through the tacks far too slowly, losing a lot of speed. A more aggressive approach worked better. On the Astus, the traveller was between me and the tiller, so the tiller extension needed to be swung around the stern behind the mainsheet onto the new side.

Similarly, old habits of controlling a gybe needed to be modified. With the asymmetric set, we were planing at well over 10 knots, and the ideal is to stay on the plane. Heading dead downwind and centring the main lead to a more violent manoeuvre than flying into the gybe as fast as possible and, as the boom was never that far out thanks to the apparent wind angle, it didn’t need much extra controlling.

Coming up onto the wind after the gybe helped the asymmetric around the front of the jib and to fill on the new side. Stay too deep and it’ll get blanketed by the main. Once we had built up some apparent wind, we could bear away again.

You’ll be on a course deep downwind before you know it, hitting speeds in the double digits

Downwind in a trimaran

Upwind cruising may be fun in a multihull, but bearing away and going with the wind is what it’s all about. Easily-driven hulls, a generous sailplan and light weight mean you can be up and planing, leaving displacement boats wallowing in your wake.

The big difference comes from apparent wind. If you’re in a boat that can do 15 knots downwind in 20 knots of true wind, the resulting wind angles can really mess with your head.

To get going then, says Brian Thompson, ‘Use those leech tell-tales again when sailing downwind and reaching to set the correct twist through the mainsheet, and use the traveller to set the correct angle of the whole sail to the wind.’

As the wind and your speed builds, bear away and trim the main accordingly.

In theory, you shouldn’t need to ease the traveller at all, but you may need to if you want to sail deep downwind. As the gust fades, you’ll find the boat slows down, so you can come back up towards the wind a little to pick up some more breeze, and then bear away as you accelerate again.

Bear away as the boat accelerates. Your course will be something of a slalom as you look to keep a consistent wind angle

This results in something of a ‘slalom’ course, and will also be accentuated if you’re sailing down waves, but that’s all quite normal for apparent wind sailing. Ultimately, you’re looking for a consistent apparent wind angle, even if the resulting wake isn’t straight.

It’s worth remembering that apparent wind reduces the felt effect of the wind, so you need a sailplan to suit the true, not apparent wind speed.

I found that the boat was more sensitive to having a balanced sailplan and trim downwind than upwind, largely because you’ve got almost double the canvas up, with the bowsprit as an extra lever. When weather helm built, I needed to ease the mainsheet to increase twist to depower so that I could bear away. I must admit, getting the boat balanced, sailing fast and light on the helm at 15 knots was something I came away feeling I needed more practice at.

Reviewing the images, I suspect the asymmetric was sheeted in too hard, with too much twist in the main.

Getting a float fully submerged is when it’s time to back off

On the water

Unfurling the gennaker worked best on a beam reach, giving plenty of airflow over the sail to help it fully unfurl. This was also roughly the fastest point of sail, ideal for getting up some speed for apparent wind sailing. We mostly had the sails set for a close reach, even when we were beyond 120º off the true wind on a broad reach.

It was possible to soak deeper downwind, but lose the apparent wind benefit downwind and our speed dropped off dramatically, prompting us to point a bit higher to find some more speed.

As the boat powered up, it paid to hold a slightly higher angle than I would have done in a monohull for the boat to properly take off and get up into double digit speeds – topping out at 15 knots. Lymington to Cowes would have taken us just half an hour at that speed. It’s easy to give yourself a heck of a beat back!

We were sailing on a pretty flat day, so didn’t have to contend with any waves to speak of. On the recent RTI this is what caused the capsizes of at least two multis, a sobering reminder that you need to sail much more conservatively in lumpier conditions.

The bows want to point downwind, so a stern-first approach works with rather than against the boat

Coming alongside

A 650kg boat with no draught and plenty of windage feels dreadfully skittish when manoeuvring in confined spaces. Straight hulls with no forgiving curves and fragile-looking sharp bows make berthing tricky. You’ve got a couple of advantages on your side, however. In the Astus, the floats are at pontoon height making stepping off easy.

Whether you have an engine in each hull of a cat, or one in the central hull of a tri, there’s also a lot more leverage to play with to turn the boat and drive her on or off the pontoon. A steerable outboard gives you even more options.

If the boat has a lifting keel or daggerboards, put them down if there’s enough depth to give you a pivot and to resist drifting. Think about getting corners onto the pontoon, rather than putting the boat alongside. On tris, you won’t be able to get to the bow to fend off as it’s too narrow. You can rig a fender up forwards on a line, and two fenders are enough on the flat sides.

Steering with the outboard towards the pontoon will drive the stern in more; steer away to drive the bow in more

Offshore wind

Coming onto the pontoon with wind blowing off, it worked well coming in stern first. If there’s a tide running, you’ll want to be heading into the tide, so find a spot down wind and down tide to start your approach so you come in at an angle.

On our first attempt we had a bit of tide under us to start with so we came in at a much steeper angle, almost 90º, although this worked out OK in the end.

The crew could then step ashore, taking a line from the stern quarter round a cleat.

Drive forwards against the line and the bow will obediently drive up towards the pontoon, bringing you flat alongside. Getting off was simple, releasing the bowline, and allowing the bow to swing out the before slipping the stern line.

Coming in astern and stopping upwind of the berth meant the bows blew towards the pontoon far to quickly

Onshore wind

Getting onto and off a pontoon with onshore wind proved rather trickier. On our first attempt we came in stern first. The issue was that once we were just upwind of our desired berth and stopped, we lost steerage and the bow immediately blew off with alarming speed towards the pontoon.

Going ahead would only increase the force of the impact, while going astern only increased the bow’s sideways drift. I managed to back out without smashing the bow, but only just, and ended up awkwardly stern to the wind with the bows pointing at the pontoon.

On our second attempt we came in bows first but having aimed at the berth, I had to motor the stern to leeward to stop the bow hitting, making for a rather forceful coming alongside.

On take three, I came in forwards and began ferry gliding towards the berth early, keeping the bows to windward of the stern. Being able to steer with the outboard meant I could go ahead to keep the bow up, and go astern with the engine pulling the stern down toward the pontoon. In this way, it was possible to come in pretty well controlled and parallel to the berth.

To get out, motoring astern against a bow line pulled the entire boat clear before slipping the line

Leaving was a different proposition all together, as I didn’t want to drag the bow along the pontoon, or to drive hard onto it to spring off. Instead, we rigged a slip-line from the forward cross beam. Going astern against this, and then turning the engine towards the wind, I could pull the stern, and the rest of the boat, out and away from the pontoon.

Keeping power on astern, once we’d reached a decent angle, we slipped the line and went astern, finding steerage way almost at once, with the bow following obediently in our wake with more control than I had anticipated.

Whether the wind is blowing onto, or off the pontoon, you want the engine to be driving or pulling the boat off the pontoon with a line on the corner you are going away from. That way you avoid point-loading fine ends where it’s hard to fender.

You’ll want a bridle to reduce swinging, but keep the pick up lines on the bow as backup

Anchoring and mooring a trimaran

While mooring a catamaran is complicated by the lack of a central bow, things should be simpler on a trimaran, and they are, mostly. Picking up a mooring buoy from the main hull bow with a low freeboard and dropping the pick-up line onto a cleat is easier even than a monohull.

The bow may be narrow, but for any lines that pass through a ring on the buoy, you still need to take it back to the same cleat to avoid chafe. That should be it, but windage from the two extra bows and the lack of keel mean the boat can dance merrily around the mooring buoy in a breeze.

Rig the bridle so the buoy sits to one side to stabilise the boat

In practice, we found that a trimaran benefits from a mooring bridle in the same way that a catamaran does. It can’t be rigged from the floats’ bows, as there are no mooring cleats, so a line passed around the outboard ends of the forward beams gave a pretty good angle, again with long lines passed through the mooring and back to the same side. The main pick-up lines stay as a safety backup.

The other trick is to rig the bridle asymmetrically so that the buoy sits to one side or the other, just enough to not be dead head to wind, making it much more stable in the wind.

On the plus side, the lack of draught or keel means that you’ll nearly always be lying head to wind, so the cockpit remains nice and sheltered whatever the tide’s doing.

We ran out of time on the day to try anchoring, but rigging a bridle, effectively a long snubber to a point on the anchor chain in a similar way wouldn’t be tricky.

If you needed not to swing, or to behave more like deeper boats nearby, hanging a bucket over the stern can help, or there’s always anchoring with a kedge, either out ahead in a V, or in line astern.

Enjoyed reading this?

A subscription to Yachting Monthly magazine costs around 40% less than the cover price .

Print and digital editions are available through Magazines Direct – where you can also find the latest deals .

YM is packed with information to help you get the most from your time on the water.

• Take your seamanship to the next level with tips, advice and skills from our experts
• Impartial in-depth reviews of the latest yachts and equipment
• Cruising guides to help you reach those dream destinations

Follow us on Facebook , Twitter and Instagram.

• September 10, 2024

5 Reasons to Choose EDAM’s Credit Hire Service

When life throws an unexpected curveball in the form of a vehicle accident, the journey that follows can be filled with stress and uncertainty, with one of the most pressing concerns for drivers being to ensure they remain mobile while their vehicle is being repaired..

This is where EDAM’s credit hire service steps in, offering a lifeline to those in need by providing a replacement vehicle quickly, efficiently and with the utmost care.

Keen to know how we do it?

Let us talk you through it and explore what it is that makes EDAM different.

We’re all human, and we offer a humanised service

At the heart of EDAM’s credit hire service is our unwavering commitment to customer care.

We believe that whilst we’re all in an age where technology can often dominate customer interactions, the value of human empathy is irreplaceable. That’s why from the first moment a claim is made, to the time the replacement vehicle is delivered, your customers are supported by dedicated EDAM employees who understand the emotional toll of an accident.

What’s more, we find that this approach ensures continuity and consistency, reducing the stress of having to repeat information to multiple parties, and customers can trust that their needs will be understood and met effectively by a single point of contact who is familiar with their case and dedicated to helping them through the process.

In other words, each and every member of our team offers a personal touch which is not just a service, but a lifeline that helps your customer navigate a difficult time with greater ease.

Our handover processes are seamless – it’s all managed under one roof

The handover process at EDAM has been meticulously designed to ensure that customers receive their replacement vehicles without any added stress.

This is done by ensuring that every single step is handled by a trained EDAM employee who provides clear communication, ensuring that customers understand the process and feel confident in the vehicle they receive. We also guarantee for all customers that only a uniformed EDAM representative will be allocated to deliver replacement vehicles, who act not just a courier, but as a trusted guide, ready to offer reassurance and answer any questions the customer may have.

Quality and care

In all areas, EDAM takes pride in maintaining the highest standards of service, so much so that all employees are trained to adhere to strict protocols that guarantee consistency and excellence. This means that customers can always expect a professional, reliable service, from the moment their claim is registered to the final return of their vehicle.

What’s more, our quality and care also extends to the condition and suitability of allocating the replacement vehicle. The benefit of owning our own fleet allows us to allocate the right vehicle at the right time and on those rare occasions where we need to source a vehicle from one of partners the customer journey remains exactly the same.

Same day hire for when time is of the essence

One of the standout features of EDAM’s credit hire service is the speed at which a replacement vehicle can be provided, whereby understanding that time is of the essence in the aftermath of an accident, we always strive to deliver a suitable vehicle on the same day the claim is made.

This rapid response is made possible by our national network of depots and a fully owned fleet of vehicles, which are constantly updated to meet the diverse needs of customers.  

What’s more, EDAM will always work around the customer too. Whether that means delivering replacement vehicles to a home address, work or jobsite building, or wherever is most suitable for our customers, all in order to help make the process smoother for them.

Billing at GTA rates

When it comes to the financial aspects of credit hire, EDAM operates with complete transparency by billing at General Terms of Agreement (GTA) rates, ensuring that all charges are fair and in line with industry standards – an approach which not only builds trust with customers, but also helps to maintain strong relationships with insurance companies and other stakeholders.

But we don’t stop there.

EDAM’s services extend beyond vehicle hire, offering a comprehensive range of post-accident solutions such as vehicle recovery, full repair solutions through our own network and even legal assistance if needed. This is made possible by our strong relationships with insurers and repair shops, which can also often lead to faster claim settlements and reduced downtime, providing a cost-effective solution that ultimately minimises the impact to your customer.

The added extra in credit hire services

With EDAM , you’re not just hiring a vehicle, you’re entrusting your customers wellbeing to a team that genuinely cares about making a difficult journey easier.

Our entire team have the knowledge and expertise to deliver the most comprehensive and best in class accident management and credit hire services, and we’re proud to say that we have been partnering with Insurers, Brokers, MGAs, TPAs and CMCs alike for over 20 years to build a reputable network.

But above all, we’re here to do a very important job, and that is to make a difficult journey easier. And you can rest assured that with our team, we will do everything in our power to make that happen.  

To find out more about us, reach out today.

/edam-group

Privacy policy, [email protected], 0330 333 3344.

Crash of an Ilyushin II-62 in Moscow: 174 killed

Get in touch

Main Contact | 208-882-5484 

After Hours Emergency | 208-779-0614

Find Your Home

WHERE TO FIND US

103 E 2nd Street Moscow, ID 83843

Main Contact | 208-882-5484

Maintenance Department | 208-417-4494

tel:208-779-0614

tel:208-779-061

Maintenance DepartmentMaintenance Department

General Questions

[email protected]

Leasing Questions

[email protected] | [email protected]

Maintenance Department

[email protected]

PM Services & Owner Questions [email protected]

Tenant Portal

Log In | Sign Up

Owner Portal

Site map  |   Accessibility

© All Rights Reserved.

Team Idaho Real Estate and Property Management

Pagina instellingen

Tekstgrootte

• Schooltijden
• Vakantierooster
• Ziekmelding en verlof
• Voor- en naschoolse opvang
• Bewegingsonderwijs
• Downloads & protocollen
• Vertrouwenspersoon & klachtenregeling

Vakantierooster & vrije dagen

NORDIC TUGS

NORTHERN MARINE

BULLFROG BOATS

MY YACHT WORTH?

• USED YACHTS

FEATURED LISTINGS

YACHTS BY BUILDER

YACHTS BY LOCATION

YACHTS BY TYPE

WHY LIST WITH US

• BUYING A TRAWLER YACHT
• TRAWLER BOAT BUYER'S GUIDE

FT LAUDERDALE

MARINA DEL REY

SAN FRANCISCO BAY

VICTORIA B.C.

• SERVICE - PNW

FLOTILLA EVENTS

SEATTLE SAILING ACADEMY

• JOIN OUR TEAM

2019 Neel Trimaran

Boat Name: "Who Cares"

Who Cares is a 2019 Neel Trimaran currently available for sale in Ft. Lauderdale Florida. This boat has a price of $949,000. Our team at Seattle Yachts is here to help you find the right boat for your needs, budget, and style. We have access to boats off the market that will never be seen online, so contact us today with your interest.

Price: $949,000

SPECIFICATIONS

For Sale: Pre-Owned NEEL 51 Trimaran - The Only One in North America!

Unmatched Opportunity

Don't miss out on this incredible opportunity to own the only pre-owned NEEL 51 Trimaran available in North America. These luxury sailing trimarans are rarely on the market, with new ones coming with a high price tag and long wait times for orders from France.

Payment Options

• Bitcoin, ETH, and Stable Coin Accepted  (Wallet-to-Wallet Transfer OK)
• Possible Owner Financing  with $250,000 Down (On Approved Credit)

About the Yacht 

One owner yacht, bought new from a NEEL dealer and captain maintained. 

Discover the unparalleled stability and cutting-edge technology of the Neel 51 Trimaran, an outstanding yacht nominated for European Yacht of the Year, now available for purchase in Ft. Lauderdale. With a motivated seller accepting Bitcoin and offering a FaceTime walk-through, this is an exceptional opportunity to own a yacht designed for both performance and comfort.

Built by NEEL TRIMARANS in La Rochelle, a hub of sailing excellence, this trimaran is not just a boat but a statement of luxury and efficiency. It features a lightweight build that enhances its speed and agility, achieving cruising speeds of 10 knots and up to 18 knots under the right conditions. The spacious design includes three guest cabins plus an owner’s cabin on the main deck with panoramic views, making it perfect for entertaining and comfortable living at sea.

Advanced features include state-of-the-art air conditioning, underwater lights and cameras for nighttime adventures, a new dinghy, and scuba gear setups, all aimed at enhancing your maritime experience. Whether you’re navigating open oceans or anchored in serene bays, the Neel 51 Trimaran promises a sailing experience like no other. Embrace the future of sailing with this meticulously designed masterpiece.

Innovative Features

• State-of-the-art air conditioning system
• Equipped with underwater lights and cameras for incredible nighttime swimming experiences
• New 60" TV, Starlink and Fusion Apollo Stereo
• Advanced sonar technology, B&G Radar, and top-of-the-line remote autopilot system
• XM Weather Radio for real-time weather updates
• Scuba-ready with tank holders
• New dinghy, life jackets, and flares
• Remote control anchor lift for safe anchoring with the touch of a button
• Superior deck/mast illumination for night-time sails
• New trampolines, tinted windows, and both 220V and 110V systems for global compatibility
• Inflatable pads, extra hot and long hose, outdoor shower, and gates for diving off the side
• 6’2” headroom inside the technical room

Electrical Equipment

• Generator: 2250 Hours (Cummins, both 220V and 110V systems - global compatibility)
• Shore Power Inlet

Electronics

• Depthsounder
• Log-Speedometer

Inside Equipment

• Electric Bilge Pump
• Manual Bilge Pump
• Refrigerator
• Fresh Water Maker
• Deep Freezer

Outside Equipment/Extras

• Cockpit Cushions-
• Steering Wheel
• Electric Winch
• Hydraulic Winch

Recent Yard Work Completed

Over $50,000 spent preparing her for the next owner. Work performed at Lauderdale Marine Center by Multi-Tech Marine Service. Receipts available and Multi-Tech can confirm the work done.

• New bottom paint and Anti-fouling application
• Full compound buff and wax (hull & topside)
• Fiberglass and gel coat work
• New halyard installed
• Sail drive service
• New boat stripe
• Serviced generator -2250 Hours

Bonus Items **

• Transferable Slip:  Hard to find, with incredible views and a great monthly dockage fee, just minutes from the ocean! 
• Recent Survey:  This yacht is in pristine condition, ready to sail away. It needs nothing but a new owner. 
• Training Available:  Our current captain is available for training if needed

Mechanical Disclaimer

Engine and generator hours are as of the date of the original listing and are a representation of what the listing broker is told by the owner and/or actual reading of the engine hour meters. The broker cannot guarantee the true hours. It is the responsibility of the purchaser and/or his agent to verify engine hours, warranties implied or otherwise and major overhauls as well as all other representations noted on the listing brochure.

The company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change or withdrawal without notice.

Listing MLS by Yachtr.com

For more information on this yacht, please contact us..

SIMILAR BOATS