Thanks Frank
Radio Controlled Yachts
We first made the D5 Glass IOM with a 3D printed deck in October 2019 and were very encouraged by how easy it made putting the boats together. We sailed these boats hard for over one year and we had no failures with the deck or boat itself. We continue to build glass boats with this method and manage to build boats underweight that need 300 grams of corrector weights
We designed the D6 intended for 3D Printing from the start and these boats have been sailing for over a year now. We found that with out at least a 75 gram glass layer on the outside the boats were prone to cracking when they had a T bone collision with another boat so this is recommended for people building kit sets. We can also sell kit sets sections that are pre glassed
The boats assemble very quickly as all parts of the boat are printed in the seven sections. The sections have inbuilt flanges at the joins so all that has to happen is to ensure the joins have plenty of glue on them for a good bond and no leaks .
Stainless-steel nuts for chain plates, turning blocks and rudder servo holder have been pre glued in place before leaving the factory so once the sections are glued together all that has to happen is for the fittings to be screwed on.
We have now the option of winch lines threaded through PTFE tube and eyebolt so no blocks required
We pre seal the sections with epoxy inside to stop any water being absorbed into the hull.
With constant developmen t with 3D printing building techniques we will keep you updated with any changes. At present we use the Prusa I3 3D printer with PLA+ filament. We glass the sections with a 17 gram glass cloth using ADR240 west epoxy resin.
The boat does needed to be faired and painted for a good finish.
The International One Metre boats are light, responsive and fun to sail. The class rule is closed and many aspects of design, materials and construction are restricted in an attempt to promote close competition. However the rule is designed to allow the DIY enthusiast some freedom to construct an inexpensive and competitive boat. The important speed related criteria of length, draught, displacement and sail plan are limited to a maximum of 1000mm, 420mm, 4kg and 3 prescribed rigs. Please Note: These plans are printed to order and take approximately 7 days for us to obtain.
Featured products.
New products.
Please select next action
Go back ( or ) Go to wish list
The dibley design advantage.
We started designing international one metres (iom) and marbleheads in 2008 and for a few years from 2011 we had a separate company building them in production runs..
Dibley Marine in the Press 
Tel +64 (0)275 933 692 Contact Dibley Dibley Newsletter
PO Box 2836 Wakatipu Queenstown, 9349 New Zealand Tel +64 (0)275 933 692
Cookies are used for web functionality and analytics.
2024 preorder packages now available, left featured collection right.
Occasional ruminations, experimentations, and observations on the art and nonsense of building wooden radio control sailboats. Thanks for visiting!
A wooden "alternative" iom rc sailboat.
Popular posts from this blog, iom sailboat stand, iom rig box (iom sail box) plans, iom alignment and measuring jig (updated).
Currency Displayed in
Hover over image to zoom
Zvonko Jelacic is a world champion Croatian IOM sailor who has spearheaded the creation of moulded single panel sails for the International One meter Class. Brighton boat works is pleased to be able to make these sails available in the United States.
IOM Sails Suit B (No2): Standard delivery includes luff pocket on headsails for headstay and luff pocket on mainsails for jackstay. Headsail and jackstay wires are fitted. Sails are made of materials that we believe are best for each suit. Headsail is transparent so you can easily see tell tails fitted to all jibs. Mainsails are made from white material.
find similar products by category, product reviews.
Write review
We promise to never spam you, and just use your email address to identify you as a valid customer.
This product hasn't received any reviews yet. Be the first to review this product!
Sorry but this item is currently unavailable. Please check back at a later stage.
All prices are in USD .
|
Click the button below to add the Jelacic 3DMonofilm IOM Sail Suit B Rig to your wish list.
And sail for less than half the price..
ALIOTH is an International One Metre class design optimized to be manufactured using 3D printing technology.
For FFF/FDM printers with a minimum print volume of 210 x 210 x 250 mm, and 0.4 nozzle.
The design team worked exhaustively in achieving modern, functional and harmonic shapes.
Special price, 3d printing technology is constantly becoming more useful and we are offering this special price as a one-time launching offer., take advantage of this amazing deal before it is too late.
33.00 €
We use this group to help alioth users during the printing and assembling processes..
Is the hull designed to be printed in vase mode.
Yes. Vase mode guarantees good layer adhesion and the best surface quality, and it reduces a lot the printing time.
We recommend PLA+ or PLA.
PLA is stiff, has low shrinkage and is easy to print. The disadvantage is a low glass transition temperature.
Darker colours warp on direct sunlight as the temperature of the surface builds up fast. To avoid this, use bright clear colours.
Don’t leave printed parts in a car on hot summer days, as the temperature can easily rise above 50°C.
Files include three different servo trays for:
Hull fittings kit (available in our online store).
Rudder and keel (SailingLAB carbon rudder and keel are available in our online store).
Radio controlled equipment.
Rigs (mast, booms, sails, etc).
Privacy overview.
IMAGES
COMMENTS
Product Description. This is a complete rig kit for the IOM. The kit features Variant Marine Hardware and is suitable for A,B,C rigs The kit includes Mast, Gooseneck, Variant "A" profile Main and Jib Boom kits with all fittings, Backstay hook, Backstay crane, Mast head plug, Head board wire, bowsie 6pack, Stainless steel rigging wire, Spectra ...
Hull Kits; IOM- MX14; Hover over image to zoom. MX Components IOM- MX14. RRP: $1,500.00. $950.00 (You save $550.00) Product Description. Brighton Boat Works is proud to be a US distributor for the exceptional new IOM the Goth MX14. Designed by the legendary Australlian Frank Russell with production machining designed and produced by Maurizio ...
Our workshop opened in 2014 with the V8 IOM. Since then we have produced hundreds of hand crafted IOM yachts in the Vickers design range. ... Fast and Forgiving to sail. Join the fun! Race. Improve your results at the club and the regatta, with the fast and forgiving V11 from Vickers RC Sailing. Set Up and Sail. The V11 detailing is simple but ...
Product Description. The standard rig pack contents. Pack contains spars, rigging and fittings sufficient to make one A rig with the following features: General features: • comprehensive plan and step by step instructions. • anodised mast material - 7075 T6 grade - natural (silver) or black. • mast or no mast as chosen.
One Metre Class. SAILSetc has a long association with the International One Metre class supplying specially designed products since the class's inception in 1988. From the first World Championship in 1994 SAILSetc designed boats and equipment have given outstanding performance for a large number of sailors against the toughest competition at ...
RadioSailingShop FP1 FREE PLANS for IOM - See details for weblinks to free plans [FP1] - See our Building an IOM page for details on building the mould and the hull of the NOUX 2 in the photo above. Note unless you are planning to build multiple hulls, or require a moulded fibreglass hull there is no need to build a mould, you can just make a planked hull from the drawings.
ADHERE TO THE DECALOGUE. By adhering to the Decalogue you voluntarily commit yourself to the good practices defined to keep the oceans clean. Sailing Lab has already adhered to the Decalogue. Alioth is an IOM class radio controlled sailboat that has been designed by RC Sailing Lab to be manufactured using 3D printing technology.
K2 Custom IOM hull + keel, bulb and rudder: this item allows the highest customization when selecting all the parts for your new IOM sailboat. IOM class "K2" Radio Controlled Sailboat by "Sailboat RC" - We Create Poetry With Sails
3D Printed IOM Kit Sets. We first made the D5 Glass IOM with a 3D printed deck in October 2019 and were very encouraged by how easy it made putting the boats together. We sailed these boats hard for over one year and we had no failures with the deck or boat itself. ... The boat does needed to be faired and painted for a good finish ...
K2 Premium IOM yacht, easy to order and with all possible items included + extra spare parts, fully assembled with clear instructions for trim and optimization. Premium "K2" IOM sailboat - the best of the best in IOM what we can do for you and it is super easy to order without complex options to select - we will take care of you and get you the ...
Each ALIOTH Lisenced Boat Kit Includes: Paid License for the ALIOTH IOM 2023 Version 3! 3D printed Boat Hull sections (printed at 1.2mm width) Currently 3 sections (Unfinished, Unsanded, Uncut) Internal 3D Printed Parts printed at 100% infill to comply with IOM Class Rules to accomodate deck hardware and internal rigging nuts & screws
Sailboat RC's 2023 Recap: A Year of Triumphs, Innovation, and Community Engagement. By Josip Marasovic | January 1st, 2024 | Categories: News Blog. As we set sail into the tranquil waters of reflection, the year 2023 stands as a monumental chapter in the voyage of Sailboat RC. From clinching something many of you called the "triple crown".
The International One Metre boats are light, responsive and fun to sail. The class rule is 'closed' and many aspects of design, materials and construction are restricted in an attempt to promote close competition. However the rule is designed to allow the DIY enthusiast some freedom to construct an inexpensive and competitive boat. The important speed related criteria of length, draught ...
time to concentrate on sailing the race course. Mast RakeA general starting point for a more modern design should have the mast set at 0 - 0.5 of degr. e aft rake combined with the below numbers with your A rig. Each. wer rig should rake aft 0.5 degrees from the one above it. Dependent on foil section/placement and other inherent design factors ...
We started designing International One Metres (IOM) and Marbleheads in 2008 and for a few years from 2011 we had a separate company building them in production runs. They were marketed as the DM range and had dominated the New Zealand fleets since they first came on the scene. Production stopped in 2017 as the builders were going down new ...
Hull Kits; IOM-Kantun SMX with servo Kit; Hover over image to zoom. MX Components IOM-Kantun SMX with servo Kit. RRP: $1,500.00. $1,378.00 (You save $122.00) Product Description. Brighton Boat Works is proud to be a US distributor for an exceptional new IOM the Kantun SMX. Designed by Multi time Champion Zvonko Jelačić of Croatia, with ...
Newport Sailors Dive into the DragonFlite 95! Since 2015, LeMahieu has sold 6,000 of these $500 battery-powered yachts, lately to household sailing names like Paul Cayard, Ed Baird, Bruce Farr, Taylor Canfield and, yes, Brad Read's brother, Ken, who is now a member of the guild. "It's fun to race sailboats, and that's what these ...
A Wooden "Alternative" IOM RC Sailboat. April 12, 2020. Being forced to stay home due to the Coronavirus quarantine has had a positive impact on my boat building. I still haven't been able to sail my newly completed Vickers V8 IOM, yet have just planked and glassed a wooden Alternative IOM. It only took me eight days.
1 joint piece (not included in price of kit but supply if mast is supplied in two pieces) GOOSENECK 1 gooseneck/kicker for IOM No 15 No 15 No 15 OR 1 ball raced gooseneck for IOM No 11C No 11C No 11C SPREADERS 1 2 x (50 mm spreader tubes + tips) + wire 21-050 21-050 - FITTINGS - PER RIG 1 backstay crane, stainless steel 22-040
Zvonko Jelacic is a world champion Croatian IOM sailor who has spearheaded the creation of moulded single panel sails for the International One meter Class. Brighton boat works is pleased to be able to make these sails available in the United States. Standard delivery includes luff pocket on headsails for headstay and luff pocket on mainsails ...
PRINT AT HOME AN IOM SAILING YACHT and sail for less than half the price. ALIOTH is an International One Metre class design optimized to be manufactured using 3D printing technology. ... Hull fittings kit (available in our online store). Rudder and keel (SailingLAB carbon rudder and keel are available in our online store).
VISS Custom IOM hull + keel, bulb and rudder: this item allows the highest customization when selecting all the parts for your new IOM sailboat. IOM class "K2" Radio Controlled Sailboat by "Sailboat RC" - We Create Poetry With Sails
Kantun S is an IOM sailing yacht that will blow your mind with its swift performance on light and low waves! It has supreme design if you are often on low wind.